EAL Level 3 NVQ Extended Diploma in Mechanical Manufacturing Engineering
600/1701/6
- Level: Level 3
- Type: Occupational Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: Excellence, Achievement & Learning Limited (Recognised)
- Total credits: 106
- Guided learning hours: 439
- Total qualification time: 1060
- Assessment methods: Portfolio of Evidence
Units (223)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Assembling and testing electronic circuits RN5260/K/504/6425 |
Level 2 | 14 | 64 |
Assembling and testing fluid power systems RN5260/J/504/6397 |
Level 2 | 14 | 64 |
Assembling pattern, model and engineering woodwork components RN5260/A/504/6431 |
Level 2 | 14 | 64 |
Assembling Structural Sub Assemblies to Produce a Public Service Vehicle RN5260/R/503/4057 |
Level 2 | 14 | 64 |
Assembling, wiring and testing electrical panels/components mounted in enclosures RN5260/H/504/6424 |
Level 2 | 14 | 64 |
Carrying out aircraft detail fitting activities RN5260/R/504/6354 |
Level 2 | 14 | 64 |
Carrying out hand forging of engineering materials RN5260/F/504/6446 |
Level 2 | 9 | 41 |
Carrying out heat treatment of engineering materials RN5260/A/504/6445 |
Level 2 | 9 | 41 |
Carrying out maintenance activities on motorsport vehicle electrical equipment RN5260/J/504/6450 |
Level 2 | 15 | 68 |
Complying with statutory regulations and organisational safety requirements RN5260/A/601/5013 |
Level 2 | 5 | 35 |
Cutting and shaping materials using thermal cutting equipment RN5260/R/504/6404 |
Level 2 | 14 | 64 |
Diagnosing and rectifying faults on motorsport vehicle systems during competition RN5260/R/504/6449 |
Level 2 | 15 | 68 |
Fettling, finishing and checking cast components RN5260/H/504/6441 |
Level 2 | 11 | 61 |
Finishing surfaces by applying coatings or coverings RN5260/M/504/6443 |
Level 2 | 9 | 41 |
Finishing surfaces by applying treatments RN5260/T/504/6444 |
Level 2 | 9 | 41 |
Fitting Sub Assemblies and Components to Public Service Vehicles RN5260/Y/503/4058 |
Level 2 | 14 | 64 |
Forming and assembling electrical cable enclosure and support systems RN5260/D/504/6423 |
Level 2 | 13 | 65 |
Forming and assembling pipework systems RN5260/L/504/6353 |
Level 2 | 14 | 64 |
General electrical and electronic engineering applications RN5260/T/504/6458 |
Level 2 | 12 | 55 |
General fabrication and welding applications RN5260/M/504/6457 |
Level 2 | 12 | 55 |
General machining, fitting and assembly applications RN5260/K/504/6456 |
Level 2 | 12 | 55 |
General maintenance engineering applications RN5260/A/504/6459 |
Level 2 | 12 | 55 |
Inspecting a motorsport vehicle during a competition RN5260/L/504/6448 |
Level 2 | 14 | 64 |
Installing aircraft mechanical fasteners RN5260/L/504/6367 |
Level 2 | 11 | 61 |
Joining Public Service Vehicle Components by Mechanical Processes RN5260/L/503/4056 |
Level 2 | 11 | 61 |
Maintaining and testing process instrumentation and control devices RN5260/A/504/6428 |
Level 2 | 15 | 68 |
Maintaining electrical equipment/systems RN5260/M/504/6426 |
Level 2 | 15 | 68 |
Maintaining electronic equipment/systems RN5260/T/504/6427 |
Level 2 | 15 | 68 |
Maintaining fluid power equipment RN5260/F/504/6401 |
Level 2 | 14 | 64 |
Maintaining mechanical devices and equipment RN5260/T/504/6394 |
Level 2 | 14 | 64 |
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation RN5260/R/503/7198 |
Level 2 | 14 | 64 |
Preparing and proving CNC fabrication machine tool programs RN5260/Y/504/6405 |
Level 2 | 14 | 64 |
Preparing and proving CNC machine tool programs RN5260/F/504/6379 |
Level 2 | 14 | 64 |
Preparing and using CNC fabrication machinery RN5260/D/504/6406 |
Level 2 | 14 | 64 |
Preparing and using CNC machining centres RN5260/D/504/6387 |
Level 2 | 14 | 64 |
Preparing and using CNC milling machines RN5260/L/504/6384 |
Level 2 | 14 | 64 |
Preparing and using CNC turning machines RN5260/F/504/6382 |
Level 2 | 14 | 64 |
Preparing and using grinding machines RN5260/T/504/6377 |
Level 2 | 15 | 68 |
Preparing and using industrial robots RN5260/D/504/6390 |
Level 2 | 14 | 64 |
Preparing and using lathes for turning operations RN5260/Y/504/6372 |
Level 2 | 15 | 68 |
Preparing and using manual flame brazing and braze welding equipment RN5260/L/504/6420 |
Level 2 | 11 | 61 |
Preparing and using manual metal arc welding equipment RN5260/K/504/6408 |
Level 2 | 15 | 68 |
Preparing and using manual oxy/fuel gas welding equipment RN5260/Y/504/6419 |
Level 2 | 14 | 64 |
Preparing and using manual TIG or plasma-arc welding equipment RN5260/M/504/6409 |
Level 2 | 15 | 68 |
Preparing and using milling machines RN5260/K/504/6375 |
Level 2 | 15 | 68 |
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment RN5260/H/504/6410 |
Level 2 | 15 | 68 |
Producing aircraft detail assemblies RN5260/L/504/6370 |
Level 2 | 14 | 64 |
Producing and preparing molten materials for casting RN5260/K/504/6439 |
Level 2 | 14 | 64 |
Producing and preparing sand moulds and cores for casting RN5260/H/504/6438 |
Level 2 | 14 | 64 |
Producing CAD models/drawings using a CAD system RN5260/R/504/6452 |
Level 2 | 11 | 61 |
Producing cast components by manual means RN5260/D/504/6440 |
Level 2 | 13 | 65 |
Producing components by rapid prototyping techniques RN5260/D/504/6437 |
Level 2 | 11 | 61 |
Producing components using hand fitting techniques RN5260/J/504/6349 |
Level 2 | 14 | 64 |
Producing composite assemblies RN5260/Y/504/6436 |
Level 2 | 14 | 64 |
Producing composite mouldings using pre-preg techniques RN5260/L/504/6434 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Film Infusion Techniques RN5260/J/504/3404 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Flow Infusion Techniques RN5260/R/504/6435 |
Level 2 | 14 | 64 |
Producing composite mouldings using wet lay-up techniques RN5260/F/504/6432 |
Level 2 | 14 | 64 |
Producing electrical or electronic engineering drawings using a CAD system RN5260/R/504/6421 |
Level 2 | 11 | 61 |
Producing engineering project plans RN5260/Y/504/6453 |
Level 2 | 8 | 37 |
Producing mechanical assemblies RN5260/F/504/6351 |
Level 2 | 15 | 68 |
Producing mechanical engineering drawings using a CAD system RN5260/F/504/6348 |
Level 2 | 11 | 61 |
Producing platework components and assemblies RN5260/L/504/6403 |
Level 2 | 14 | 64 |
Producing sheet metal components and assemblies RN5260/J/504/6402 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport engines pre-competition RN5260/L/504/6451 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport vehicles pre-competition RN5260/J/504/6447 |
Level 2 | 14 | 64 |
Using and interpreting engineering data and documentation RN5260/Y/601/5102 |
Level 2 | 5 | 25 |
Using computer software packages to assist with engineering activities RN5260/D/504/6454 |
Level 2 | 8 | 37 |
Using wood for pattern, modelmaking and other engineering applications RN5260/T/504/6430 |
Level 2 | 15 | 68 |
Wiring and testing electrical equipment and circuits RN5260/Y/504/6422 |
Level 2 | 14 | 64 |
Wiring and testing programmable controller based systems RN5260/F/504/6429 |
Level 2 | 15 | 68 |
Aligning and Setting Up Holographic Equipment RN5260/J/600/5827 |
Level 3 | 77 | 161 |
Applying Finishes to Composite Mouldings RN5260/D/600/5588 |
Level 3 | 46 | 150 |
Assembling Mechanical Products RN5260/J/600/5472 |
Level 3 | 70 | 210 |
Assembling Non-Metallic Pipework RN5260/K/600/5562 |
Level 3 | 30 | 91 |
Assembling Screwed Pipework RN5260/L/600/5554 |
Level 3 | 30 | 91 |
Assembling Small Bore Non-Ferrous Pipework RN5260/D/600/5557 |
Level 3 | 30 | 91 |
Bending Strip Spring Components using Press Brakes RN5260/Y/600/5704 |
Level 3 | 30 | 91 |
Bonding Composite Mouldings RN5260/F/600/5583 |
Level 3 | 30 | 91 |
Building Optical Systems RN5260/M/600/5823 |
Level 3 | 78 | 175 |
Carrying Out CNC Machine Tool Programming RN5260/M/600/5529 |
Level 3 | 84 | 231 |
Carrying Out Heat Treatment of Springs RN5260/D/600/5719 |
Level 3 | 30 | 91 |
Carrying Out Laser/Optical Metrology RN5260/D/600/5820 |
Level 3 | 46 | 150 |
Carrying Out Non-Destructive Flaw Detection on Components During Overhauling Activities RN5260/A/600/5615 |
Level 3 | 24 | 89 |
Carrying Out Quality Control of Spring Making Activities RN5260/M/600/5725 |
Level 3 | 46 | 150 |
Carrying Out Shot Peening of Springs RN5260/H/600/5723 |
Level 3 | 30 | 91 |
Carrying Out Tests on Overhauled Industrial Power Turbines RN5260/K/600/5500 |
Level 3 | 70 | 210 |
Carrying Out Tests on Overhauled Piston Engines _Fixed Dynamometer_ RN5260/D/600/5512 |
Level 3 | 70 | 210 |
Checking Mechanical Components for Serviceability During Overhauling Activities RN5260/H/600/5611 |
Level 3 | 24 | 89 |
Checking that Completed Assemblies Comply with Specification RN5260/L/600/5537 |
Level 3 | 30 | 91 |
Checking that Overhauled Mechanical Assemblies Comply with Specification RN5260/A/600/5629 |
Level 3 | 30 | 91 |
Dismantling Mechanical Equipment in Preparation for Overhaul RN5260/R/600/5605 |
Level 3 | 49 | 161 |
Drilling and Finishing Holes in Strip Spring Components RN5260/M/600/5711 |
Level 3 | 16 | 57 |
Fitting Electrical and Electronic Components to Mechanical Assemblies RN5260/R/600/5488 |
Level 3 | 60 | 161 |
Fitting Fluid Power Components to Mechanical Assemblies RN5260/H/600/5480 |
Level 3 | 60 | 161 |
Fitting Pipework Systems to Mechanical Assemblies RN5260/F/600/5485 |
Level 3 | 60 | 161 |
Following Clean Room and Clean Work Area Protocols RN5260/R/600/5829 |
Level 3 | 16 | 57 |
Forming Strip Spring Components using Power Presses RN5260/M/600/5708 |
Level 3 | 30 | 91 |
Forming Strip Spring Components using Power Rolling Machines RN5260/L/600/5702 |
Level 3 | 30 | 91 |
Grinding Spring Ends by Hand RN5260/D/600/5560 |
Level 3 | 16 | 57 |
Handing Over Machine Tools to Production Operators RN5260/A/600/5436 |
Level 3 | 38 | 98 |
Identifying Defects in Composite Mouldings RN5260/A/600/5596 |
Level 3 | 30 | 91 |
Inspecting Optical Components using Co-ordinate Measuring Machines _CMM_ RN5260/K/600/5819 |
Level 3 | 46 | 150 |
Inspecting Optical Components using Mechanical Instruments RN5260/D/600/5817 |
Level 3 | 30 | 91 |
Loading and Proving CNC Machine Tool Programs RN5260/L/600/5523 |
Level 3 | 24 | 91 |
Machining Components using Broaching Machines RN5260/A/600/5503 |
Level 3 | 33 | 119 |
Machining Components using Centre Lathes RN5260/A/600/5386 |
Level 3 | 77 | 161 |
Machining Components using CNC Aspheric Glass and Diamond Turning Machines RN5260/F/600/5762 |
Level 3 | 46 | 150 |
Machining Components using CNC Electro-Discharge Machines RN5260/F/600/5924 |
Level 3 | 63 | 126 |
Machining Components using CNC Gear Cutting Machines RN5260/D/600/5980 |
Level 3 | 63 | 126 |
Machining Components using CNC Grinding Machines RN5260/R/600/5622 |
Level 3 | 63 | 126 |
Machining Components using CNC Horizontal Boring Machines RN5260/K/600/5965 |
Level 3 | 63 | 126 |
Machining Components using CNC Laser Profiling Machines RN5260/H/600/5916 |
Level 3 | 63 | 126 |
Machining Components using CNC Machining Centres RN5260/D/600/5994 |
Level 3 | 63 | 126 |
Machining Components using CNC Milling Machines RN5260/K/600/5576 |
Level 3 | 63 | 126 |
Machining Components using CNC Optical Grinding and Polishing Machines RN5260/D/600/5770 |
Level 3 | 46 | 150 |
Machining Components using CNC Punching Machines RN5260/T/600/5662 |
Level 3 | 63 | 126 |
Machining Components using CNC Turning Machines RN5260/F/600/5566 |
Level 3 | 63 | 126 |
Machining Components using CNC Vertical Boring Machines RN5260/Y/600/5928 |
Level 3 | 63 | 126 |
Machining Components using Electro-Discharge Machines RN5260/L/600/5439 |
Level 3 | 77 | 161 |
Machining Components using Gear Cutting Machines RN5260/K/600/5397 |
Level 3 | 77 | 161 |
Machining Components using Gear Grinding Machines RN5260/D/600/5400 |
Level 3 | 77 | 161 |
Machining Components using Grinding Machines RN5260/Y/600/5458 |
Level 3 | 77 | 161 |
Machining Components using Honing and Lapping Machines RN5260/L/600/5487 |
Level 3 | 33 | 119 |
Machining Components using Horizontal Boring Machines RN5260/L/600/5411 |
Level 3 | 77 | 161 |
Machining Components using Milling Machines RN5260/L/600/5392 |
Level 3 | 77 | 161 |
Machining Components using Shaping, Planing or Slotting Machines RN5260/Y/600/5394 |
Level 3 | 69 | 126 |
Machining Components using Turret Lathes RN5260/J/600/5388 |
Level 3 | 77 | 161 |
Machining Components using Vertical Boring Machines RN5260/Y/600/5430 |
Level 3 | 77 | 161 |
Machining Infra-Red/Special Material Lenses RN5260/J/600/5746 |
Level 3 | 77 | 161 |
Machining Optical Cylinders and Domes RN5260/J/600/5813 |
Level 3 | 77 | 161 |
Machining Optical Glass Lenses RN5260/R/600/5751 |
Level 3 | 77 | 161 |
Machining Optical Plastic Components RN5260/L/600/5814 |
Level 3 | 77 | 161 |
Machining Optical Prism and Flat Components RN5260/H/600/5754 |
Level 3 | 77 | 161 |
Making Compression Springs using Hand Forming Methods RN5260/F/600/5521 |
Level 3 | 46 | 150 |
Making Extension Springs using Hand Forming Methods RN5260/Y/600/5539 |
Level 3 | 46 | 150 |
Making Spring Wire Forms using Hand Forming Methods RN5260/A/600/5548 |
Level 3 | 46 | 150 |
Making Strip Spring Components using Shearing Machines RN5260/Y/600/5699 |
Level 3 | 30 | 91 |
Making Torsion Springs using Hand Forming Methods RN5260/K/600/5531 |
Level 3 | 46 | 150 |
Manufacturing One-Off Tooling for Spring Making Activities RN5260/M/600/5739 |
Level 3 | 77 | 161 |
Operating CNC Spring Making Machines RN5260/T/600/5693 |
Level 3 | 30 | 91 |
Overhauling Components of Hydraulic Equipment RN5260/J/600/5486 |
Level 3 | 77 | 161 |
Overhauling Components of Pneumatic, Vacuum or Compressed Air Equipment RN5260/D/600/5493 |
Level 3 | 77 | 161 |
Overhauling Gearbox Assemblies RN5260/Y/600/5654 |
Level 3 | 86 | 210 |
Overhauling Industrial Clutch and Brake Assemblies RN5260/K/600/5657 |
Level 3 | 77 | 161 |
Overhauling Industrial Power Turbine Combustion Assemblies RN5260/Y/600/5640 |
Level 3 | 86 | 210 |
Overhauling Industrial Power Turbine Compressor Assemblies RN5260/R/600/5636 |
Level 3 | 86 | 210 |
Overhauling Industrial Power Turbines by Module Replacement RN5260/T/600/5631 |
Level 3 | 86 | 210 |
Overhauling Piston Engines RN5260/F/600/5650 |
Level 3 | 86 | 210 |
Overhauling Pump Assemblies RN5260/F/600/5468 |
Level 3 | 77 | 161 |
Overhauling Turbine Assemblies from Industrial Power Turbines RN5260/A/600/5646 |
Level 3 | 86 | 210 |
Overhauling Valve Assemblies RN5260/K/600/5478 |
Level 3 | 77 | 161 |
Performing Laser Optical System Alignment RN5260/F/600/5826 |
Level 3 | 46 | 150 |
Pipe Bending and Forming by Hand Methods RN5260/Y/600/5542 |
Level 3 | 46 | 150 |
Pipe Bending and Forming using Bending Machines RN5260/T/600/5547 |
Level 3 | 46 | 150 |
Polishing and Smoothing of Lens or Mirror Surfaces RN5260/R/600/5815 |
Level 3 | 77 | 161 |
Preparing and Testing Pipework Systems RN5260/J/600/5567 |
Level 3 | 46 | 150 |
Producing Components by Manual Machining RN5260/H/600/5477 |
Level 3 | 70 | 210 |
Producing Components using Hand Fitting Techniques RN5260/A/600/5470 |
Level 3 | 70 | 210 |
Producing Components using Metal Spinning Machines RN5260/K/600/5514 |
Level 3 | 77 | 161 |
Producing Composite Assemblies RN5260/M/600/5580 |
Level 3 | 86 | 210 |
Producing Composite Mouldings using Pre-Preg Laminating Techniques RN5260/D/600/5574 |
Level 3 | 86 | 210 |
Producing Composite Mouldings using Wet Lay-up Techniques RN5260/T/600/5578 |
Level 3 | 86 | 210 |
Producing Piston Engine Assemblies RN5260/J/600/5522 |
Level 3 | 70 | 210 |
Producing Power Turbine Combustion Assemblies RN5260/Y/600/5492 |
Level 3 | 70 | 210 |
Producing Power Turbine Compressor Assemblies RN5260/A/600/5498 |
Level 3 | 70 | 210 |
Producing Power Turbine Gearbox Assemblies RN5260/R/600/5510 |
Level 3 | 70 | 210 |
Producing Power Turbine Major Assemblies RN5260/M/600/5515 |
Level 3 | 70 | 210 |
Producing Replacement Components for Overhauling Activities RN5260/D/600/5624 |
Level 3 | 49 | 161 |
Producing Socket and Flange Fillet Welded Joints in Pipe using a Manual Welding Process RN5260/L/600/5571 |
Level 3 | 86 | 210 |
Producing Turbine Assemblies RN5260/F/600/5504 |
Level 3 | 70 | 210 |
Programming CNC Spring Making Machines RN5260/H/600/5687 |
Level 3 | 84 | 231 |
Repairing and Modifying Mechanical Assemblies RN5260/H/600/5527 |
Level 3 | 70 | 210 |
Repairing Composite Mouldings RN5260/Y/600/5587 |
Level 3 | 77 | 161 |
Restoring Mechanical Components to Usable Condition by Repair RN5260/R/600/5619 |
Level 3 | 49 | 161 |
Setting and Operating CNC Laser Profiling Machines for Strip Spring Making RN5260/A/600/5744 |
Level 3 | 77 | 161 |
Setting and Using a Fly Press for Spring Making Activities RN5260/F/600/5695 |
Level 3 | 30 | 91 |
Setting Automatic Cold Wire Compression Spring Making Machines for Production RN5260/H/600/5575 |
Level 3 | 46 | 150 |
Setting Automatic Cold Wire Extension Spring Making Machines for Production RN5260/J/600/5648 |
Level 3 | 46 | 150 |
Setting Automatic Cold Wire Forming Machines to Produce Spring Wire Forms RN5260/M/600/5661 |
Level 3 | 46 | 150 |
Setting Automatic Cold Wire Torsion Spring Making Machines for Production RN5260/L/600/5635 |
Level 3 | 46 | 150 |
Setting Automatic Hot Wire Compression Spring Making Machines for Production RN5260/D/600/5672 |
Level 3 | 46 | 150 |
Setting Automatic Spring End Grinding Machines for Production RN5260/L/600/5683 |
Level 3 | 16 | 60 |
Setting Automatic Spring Making Machines for the Production of Clock, Power, Scroll and Volute Springs RN5260/R/600/5653 |
Level 3 | 46 | 150 |
Setting Broaching Machines for Production RN5260/L/600/5490 |
Level 3 | 78 | 175 |
Setting Capstan and Turret Lathes for Production RN5260/Y/600/5444 |
Level 3 | 91 | 210 |
Setting Centre Lathes for Production RN5260/T/600/5385 |
Level 3 | 91 | 210 |
Setting CNC Aspheric Glass and Diamond Turning Machines RN5260/A/600/5758 |
Level 3 | 78 | 175 |
Setting CNC Electro-Discharge Machines for Production RN5260/M/600/5921 |
Level 3 | 70 | 140 |
Setting CNC Gear Cutting Machines for Production RN5260/L/600/5974 |
Level 3 | 70 | 140 |
Setting CNC Grinding Machines for Production RN5260/J/600/5584 |
Level 3 | 70 | 140 |
Setting CNC Horizontal Boring Machines for Production RN5260/K/600/5951 |
Level 3 | 70 | 140 |
Setting CNC Laser Profiling Machines for Production RN5260/R/600/5670 |
Level 3 | 70 | 140 |
Setting CNC Machining Centres for Production RN5260/L/600/5991 |
Level 3 | 70 | 140 |
Setting CNC Milling Machines for Production RN5260/R/600/5572 |
Level 3 | 70 | 140 |
Setting CNC Optical Grinding and Polishing Machines for Production RN5260/Y/600/5766 |
Level 3 | 78 | 175 |
Setting CNC Punching Machines for Production RN5260/K/600/5643 |
Level 3 | 70 | 140 |
Setting CNC Spring Making Machines for Production RN5260/H/600/5690 |
Level 3 | 46 | 150 |
Setting CNC Turning Machines for Production RN5260/H/600/5561 |
Level 3 | 70 | 140 |
Setting CNC Vertical Boring Machines for Production RN5260/R/600/5927 |
Level 3 | 70 | 140 |
Setting Electro-Discharge Machines for Production RN5260/H/600/5432 |
Level 3 | 91 | 210 |
Setting Gear Cutting Machines for Production RN5260/D/600/5395 |
Level 3 | 91 | 210 |
Setting Gear Grinding Machines for Production RN5260/M/600/5398 |
Level 3 | 91 | 210 |
Setting Grinding Machines for Production RN5260/M/600/5448 |
Level 3 | 91 | 210 |
Setting Honing and Lapping Machines for Production RN5260/L/600/5473 |
Level 3 | 78 | 175 |
Setting Horizontal Boring Machines for Production RN5260/K/600/5402 |
Level 3 | 91 | 210 |
Setting Metal Spinning Machines for Production RN5260/D/600/5509 |
Level 3 | 78 | 175 |
Setting Milling Machines for Production RN5260/J/600/5391 |
Level 3 | 91 | 210 |
Setting Multi-Spindle Automatic Turning Machines for Production RN5260/T/600/5452 |
Level 3 | 77 | 161 |
Setting Power Presses for Production RN5260/A/600/5467 |
Level 3 | 91 | 210 |
Setting Shaping, Planing or Slotting Machines for Production RN5260/R/600/5393 |
Level 3 | 78 | 175 |
Setting Single and Multi-Spindle Drilling Machines for Production RN5260/J/600/5455 |
Level 3 | 77 | 161 |
Setting Single-Spindle Automatic Turning Machines for Production RN5260/K/600/5450 |
Level 3 | 91 | 210 |
Setting Special-Purpose Machines for Production RN5260/D/600/5462 |
Level 3 | 91 | 210 |
Setting Tool and Cutter Grinding Machines for Production RN5260/Y/600/5461 |
Level 3 | 77 | 161 |
Setting Turret Lathes for Production RN5260/F/600/5387 |
Level 3 | 91 | 210 |
Setting Vertical Boring Machines for Production RN5260/F/600/5423 |
Level 3 | 91 | 210 |
Slinging, Lifting and Moving Equipment, Components or Materials for Overhauling Activities RN5260/T/600/5600 |
Level 3 | 24 | 89 |
Terminating Fibre-Optic Cables RN5260/K/600/5822 |
Level 3 | 30 | 91 |
Trimming Composite Mouldings using Hand Tools RN5260/K/600/5593 |
Level 3 | 46 | 150 |
Using Heat to Assist with the Bending and Forming of Spring Components RN5260/L/600/5716 |
Level 3 | 16 | 57 |
Vacuum Coating Optical Materials RN5260/Y/600/5816 |
Level 3 | 30 | 91 |
Working efficiently and effectively in engineering RN5260/K/601/5055 |
Level 3 | 5 | 25 |