EAL Level 3 NVQ Extended Diploma in Electrical and Electronic Engineering
600/9931/8
- Level: Level 3
- Type: Occupational Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: Excellence, Achievement & Learning Limited (Recognised)
- Total credits: 117
- Guided learning hours: 432
- Total qualification time: 1170
- Assessment methods: Portfolio of Evidence
Units (106)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Assembling and testing electronic circuits RN5260/K/504/6425 |
Level 2 | 14 | 64 |
Assembling and testing fluid power systems RN5260/J/504/6397 |
Level 2 | 14 | 64 |
Assembling pattern, model and engineering woodwork components RN5260/A/504/6431 |
Level 2 | 14 | 64 |
Assembling Structural Sub Assemblies to Produce a Public Service Vehicle RN5260/R/503/4057 |
Level 2 | 14 | 64 |
Assembling, wiring and testing electrical panels/components mounted in enclosures RN5260/H/504/6424 |
Level 2 | 14 | 64 |
Carrying out aircraft detail fitting activities RN5260/R/504/6354 |
Level 2 | 14 | 64 |
Carrying out hand forging of engineering materials RN5260/F/504/6446 |
Level 2 | 9 | 41 |
Carrying out heat treatment of engineering materials RN5260/A/504/6445 |
Level 2 | 9 | 41 |
Carrying out maintenance activities on motorsport vehicle electrical equipment RN5260/J/504/6450 |
Level 2 | 15 | 68 |
Complying with statutory regulations and organisational safety requirements RN5260/A/601/5013 |
Level 2 | 5 | 35 |
Conducting business improvement activities RN5260/H/504/6455 |
Level 2 | 8 | 41 |
Cutting and shaping materials using thermal cutting equipment RN5260/R/504/6404 |
Level 2 | 14 | 64 |
Diagnosing and rectifying faults on motorsport vehicle systems during competition RN5260/R/504/6449 |
Level 2 | 15 | 68 |
Fettling, finishing and checking cast components RN5260/H/504/6441 |
Level 2 | 11 | 61 |
Finishing surfaces by applying coatings or coverings RN5260/M/504/6443 |
Level 2 | 9 | 41 |
Finishing surfaces by applying treatments RN5260/T/504/6444 |
Level 2 | 9 | 41 |
Fitting Sub Assemblies and Components to Public Service Vehicles RN5260/Y/503/4058 |
Level 2 | 14 | 64 |
Forming and assembling electrical cable enclosure and support systems RN5260/D/504/6423 |
Level 2 | 13 | 65 |
Forming and assembling pipework systems RN5260/L/504/6353 |
Level 2 | 14 | 64 |
General electrical and electronic engineering applications RN5260/T/504/6458 |
Level 2 | 12 | 55 |
General fabrication and welding applications RN5260/M/504/6457 |
Level 2 | 12 | 55 |
General machining, fitting and assembly applications RN5260/K/504/6456 |
Level 2 | 12 | 55 |
General maintenance engineering applications RN5260/A/504/6459 |
Level 2 | 12 | 55 |
Inspecting a motorsport vehicle during a competition RN5260/L/504/6448 |
Level 2 | 14 | 64 |
Installing aircraft mechanical fasteners RN5260/L/504/6367 |
Level 2 | 11 | 61 |
Joining Public Service Vehicle Components by Mechanical Processes RN5260/L/503/4056 |
Level 2 | 11 | 61 |
Maintaining and testing process instrumentation and control devices RN5260/A/504/6428 |
Level 2 | 15 | 68 |
Maintaining electrical equipment/systems RN5260/M/504/6426 |
Level 2 | 15 | 68 |
Maintaining electronic equipment/systems RN5260/T/504/6427 |
Level 2 | 15 | 68 |
Maintaining fluid power equipment RN5260/F/504/6401 |
Level 2 | 14 | 64 |
Maintaining mechanical devices and equipment RN5260/T/504/6394 |
Level 2 | 14 | 64 |
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation RN5260/R/503/7198 |
Level 2 | 14 | 64 |
Preparing and proving CNC fabrication machine tool programs RN5260/Y/504/6405 |
Level 2 | 14 | 64 |
Preparing and proving CNC machine tool programs RN5260/F/504/6379 |
Level 2 | 14 | 64 |
Preparing and using CNC fabrication machinery RN5260/D/504/6406 |
Level 2 | 14 | 64 |
Preparing and using CNC machining centres RN5260/D/504/6387 |
Level 2 | 14 | 64 |
Preparing and using CNC milling machines RN5260/L/504/6384 |
Level 2 | 14 | 64 |
Preparing and using CNC turning machines RN5260/F/504/6382 |
Level 2 | 14 | 64 |
Preparing and using grinding machines RN5260/T/504/6377 |
Level 2 | 15 | 68 |
Preparing and using industrial robots RN5260/D/504/6390 |
Level 2 | 14 | 64 |
Preparing and using lathes for turning operations RN5260/Y/504/6372 |
Level 2 | 15 | 68 |
Preparing and using manual flame brazing and braze welding equipment RN5260/L/504/6420 |
Level 2 | 11 | 61 |
Preparing and using manual metal arc welding equipment RN5260/K/504/6408 |
Level 2 | 15 | 68 |
Preparing and using manual oxy/fuel gas welding equipment RN5260/Y/504/6419 |
Level 2 | 14 | 64 |
Preparing and using manual TIG or plasma-arc welding equipment RN5260/M/504/6409 |
Level 2 | 15 | 68 |
Preparing and using milling machines RN5260/K/504/6375 |
Level 2 | 15 | 68 |
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment RN5260/H/504/6410 |
Level 2 | 15 | 68 |
Producing aircraft detail assemblies RN5260/L/504/6370 |
Level 2 | 14 | 64 |
Producing and preparing molten materials for casting RN5260/K/504/6439 |
Level 2 | 14 | 64 |
Producing and preparing sand moulds and cores for casting RN5260/H/504/6438 |
Level 2 | 14 | 64 |
Producing CAD models/drawings using a CAD system RN5260/R/504/6452 |
Level 2 | 11 | 61 |
Producing cast components by manual means RN5260/D/504/6440 |
Level 2 | 13 | 65 |
Producing components by rapid prototyping techniques RN5260/D/504/6437 |
Level 2 | 11 | 61 |
Producing components using hand fitting techniques RN5260/J/504/6349 |
Level 2 | 14 | 64 |
Producing composite assemblies RN5260/Y/504/6436 |
Level 2 | 14 | 64 |
Producing composite mouldings using pre-preg techniques RN5260/L/504/6434 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Film Infusion Techniques RN5260/J/504/3404 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Flow Infusion Techniques RN5260/R/504/6435 |
Level 2 | 14 | 64 |
Producing composite mouldings using wet lay-up techniques RN5260/F/504/6432 |
Level 2 | 14 | 64 |
Producing electrical or electronic engineering drawings using a CAD system RN5260/R/504/6421 |
Level 2 | 11 | 61 |
Producing engineering project plans RN5260/Y/504/6453 |
Level 2 | 8 | 37 |
Producing mechanical assemblies RN5260/F/504/6351 |
Level 2 | 15 | 68 |
Producing mechanical engineering drawings using a CAD system RN5260/F/504/6348 |
Level 2 | 11 | 61 |
Producing platework components and assemblies RN5260/L/504/6403 |
Level 2 | 14 | 64 |
Producing sheet metal components and assemblies RN5260/J/504/6402 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport engines pre-competition RN5260/L/504/6451 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport vehicles pre-competition RN5260/J/504/6447 |
Level 2 | 14 | 64 |
Using and interpreting engineering data and documentation RN5260/Y/601/5102 |
Level 2 | 5 | 25 |
Using computer software packages to assist with engineering activities RN5260/D/504/6454 |
Level 2 | 8 | 37 |
Using wood for pattern, modelmaking and other engineering applications RN5260/T/504/6430 |
Level 2 | 15 | 68 |
Wiring and testing electrical equipment and circuits RN5260/Y/504/6422 |
Level 2 | 14 | 64 |
Wiring and testing programmable controller based systems RN5260/F/504/6429 |
Level 2 | 15 | 68 |
Adjusting and Sustaining Electronic Circuit Manufacturing Processes RN5260/H/504/9758 |
Level 3 | 40 | 77 |
Adjusting and Sustaining Semiconductor Processes RN5260/F/504/9752 |
Level 3 | 40 | 77 |
Assembling and Checking Printed and Allied Electronic Circuits RN5260/H/504/9808 |
Level 3 | 55 | 98 |
Assembling and Fitting Commutators RN5260/Y/504/9837 |
Level 3 | 20 | 42 |
Assembling and Fitting Electrical Rotating Equipment RN5260/Y/504/9840 |
Level 3 | 50 | 105 |
Assembling and Wiring Electronic Equipment and Systems RN5260/M/504/9813 |
Level 3 | 45 | 84 |
Assembling Large Transformer and Inductor Cores RN5260/H/504/9825 |
Level 3 | 55 | 126 |
Assembling Rotor and Armature Windings RN5260/J/504/9834 |
Level 3 | 25 | 56 |
Assembling Stator Windings RN5260/R/504/9836 |
Level 3 | 25 | 56 |
Assembling Transformers and Inductors RN5260/T/504/9831 |
Level 3 | 48 | 119 |
Balancing Assembled Rotors or Armatures RN5260/D/504/9838 |
Level 3 | 30 | 63 |
Carrying Out Functional Tests on Electrical Equipment RN5260/A/504/9846 |
Level 3 | 50 | 105 |
Checking the Compliance of Electrical Equipment RN5260/L/504/9849 |
Level 3 | 20 | 56 |
Checking the Compliance of Electronic Components RN5260/R/504/9805 |
Level 3 | 20 | 56 |
Designing Electronic Circuit Layouts Using CAD Tools RN5260/K/504/9745 |
Level 3 | 60 | 126 |
Evaluating and Recommending Circuit Design Options RN5260/M/504/9746 |
Level 3 | 70 | 154 |
Fitting Small Transformer and Inductor Cores RN5260/F/504/9833 |
Level 3 | 30 | 112 |
Identifying and Following Clean Room/Clean Work Area Protocols RN5260/F/504/9749 |
Level 3 | 7 | 28 |
Locating and Diagnosing Faults in Electrical Systems and Equipment RN5260/J/504/9848 |
Level 3 | 50 | 105 |
Locating and Diagnosing Faults in Post-Production Electronic Components and Circuits RN5260/J/504/9817 |
Level 3 | 45 | 77 |
Monitoring and Analysing Data from Electronic Circuit Manufacturing Processes RN5260/Y/504/9756 |
Level 3 | 35 | 77 |
Monitoring and Analysing Data from Semiconductor Processes RN5260/A/504/9751 |
Level 3 | 35 | 77 |
Mounting Electrical Components in Enclosures RN5260/D/504/9841 |
Level 3 | 55 | 133 |
Preparing Facilities for Testing Electronic Components and Circuits RN5260/J/504/9820 |
Level 3 | 18 | 63 |
Preparing Manufacturing Systems Equipment for Operation RN5260/R/504/9755 |
Level 3 | 18 | 63 |
Processing Electronic Components within the Manufacturing System RN5260/D/504/9760 |
Level 3 | 50 | 126 |
Providing Technical Guidance to Others RN5260/T/504/9747 |
Level 3 | 35 | 70 |
Selecting and Preparing Materials and Components for Electrical Assembly RN5260/M/504/9844 |
Level 3 | 18 | 63 |
Selecting and Preparing Materials and Components for Manufacturing RN5260/L/504/9754 |
Level 3 | 18 | 63 |
Testing Post-Production Electronic Components and Circuits RN5260/A/504/9815 |
Level 3 | 45 | 77 |
Winding Transformer and Inductor Coils RN5260/M/504/9830 |
Level 3 | 45 | 112 |
Wiring Electrical Components and Equipment in Enclosures RN5260/K/504/9843 |
Level 3 | 60 | 147 |
Working efficiently and effectively in engineering RN5260/K/601/5055 |
Level 3 | 5 | 25 |
Writing Specifications for Testing Electronic Components or Circuits RN5260/Y/504/9823 |
Level 3 | 30 | 70 |