EAL Level 3 NVQ Extended Diploma in Engineering Technical Support
600/9794/2
- Level: Level 3
- Type: Occupational Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: Excellence, Achievement & Learning Limited (Recognised)
- Total credits: 150
- Guided learning hours: 530
- Total qualification time: 1500
- Assessment methods: Portfolio of Evidence
Units (141)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Assembling and testing electronic circuits RN5260/K/504/6425 |
Level 2 | 14 | 64 |
Assembling and testing fluid power systems RN5260/J/504/6397 |
Level 2 | 14 | 64 |
Assembling pattern, model and engineering woodwork components RN5260/A/504/6431 |
Level 2 | 14 | 64 |
Assembling Structural Sub Assemblies to Produce a Public Service Vehicle RN5260/R/503/4057 |
Level 2 | 14 | 64 |
Assembling, wiring and testing electrical panels/components mounted in enclosures RN5260/H/504/6424 |
Level 2 | 14 | 64 |
Carrying out aircraft detail fitting activities RN5260/R/504/6354 |
Level 2 | 14 | 64 |
Carrying out maintenance activities on motorsport vehicle electrical equipment RN5260/J/504/6450 |
Level 2 | 15 | 68 |
Complying with statutory regulations and organisational safety requirements RN5260/A/601/5013 |
Level 2 | 5 | 35 |
Conducting business improvement activities RN5260/H/504/6455 |
Level 2 | 8 | 41 |
Cutting and shaping materials using thermal cutting equipment RN5260/R/504/6404 |
Level 2 | 14 | 64 |
Diagnosing and rectifying faults on motorsport vehicle systems during competition RN5260/R/504/6449 |
Level 2 | 15 | 68 |
Fettling, finishing and checking cast components RN5260/H/504/6441 |
Level 2 | 11 | 61 |
Finishing surfaces by applying coatings or coverings RN5260/M/504/6443 |
Level 2 | 9 | 41 |
Finishing surfaces by applying treatments RN5260/T/504/6444 |
Level 2 | 9 | 41 |
Fitting Sub Assemblies and Components to Public Service Vehicles RN5260/Y/503/4058 |
Level 2 | 14 | 64 |
Forming and assembling electrical cable enclosure and support systems RN5260/D/504/6423 |
Level 2 | 13 | 65 |
Forming and assembling pipework systems RN5260/L/504/6353 |
Level 2 | 14 | 64 |
General electrical and electronic engineering applications RN5260/T/504/6458 |
Level 2 | 12 | 55 |
General fabrication and welding applications RN5260/M/504/6457 |
Level 2 | 12 | 55 |
General machining, fitting and assembly applications RN5260/K/504/6456 |
Level 2 | 12 | 55 |
General maintenance engineering applications RN5260/A/504/6459 |
Level 2 | 12 | 55 |
Inspecting a motorsport vehicle during a competition RN5260/L/504/6448 |
Level 2 | 14 | 64 |
Installing aircraft mechanical fasteners RN5260/L/504/6367 |
Level 2 | 11 | 61 |
Joining Public Service Vehicle Components by Mechanical Processes RN5260/L/503/4056 |
Level 2 | 11 | 61 |
Maintaining and testing process instrumentation and control devices RN5260/A/504/6428 |
Level 2 | 15 | 68 |
Maintaining electrical equipment/systems RN5260/M/504/6426 |
Level 2 | 15 | 68 |
Maintaining electronic equipment/systems RN5260/T/504/6427 |
Level 2 | 15 | 68 |
Maintaining fluid power equipment RN5260/F/504/6401 |
Level 2 | 14 | 64 |
Maintaining mechanical devices and equipment RN5260/T/504/6394 |
Level 2 | 14 | 64 |
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation RN5260/R/503/7198 |
Level 2 | 14 | 64 |
Preparing and proving CNC fabrication machine tool programs RN5260/Y/504/6405 |
Level 2 | 14 | 64 |
Preparing and proving CNC machine tool programs RN5260/F/504/6379 |
Level 2 | 14 | 64 |
Preparing and using CNC fabrication machinery RN5260/D/504/6406 |
Level 2 | 14 | 64 |
Preparing and using CNC machining centres RN5260/D/504/6387 |
Level 2 | 14 | 64 |
Preparing and using CNC milling machines RN5260/L/504/6384 |
Level 2 | 14 | 64 |
Preparing and using CNC turning machines RN5260/F/504/6382 |
Level 2 | 14 | 64 |
Preparing and using grinding machines RN5260/T/504/6377 |
Level 2 | 15 | 68 |
Preparing and using industrial robots RN5260/D/504/6390 |
Level 2 | 14 | 64 |
Preparing and using lathes for turning operations RN5260/Y/504/6372 |
Level 2 | 15 | 68 |
Preparing and using manual flame brazing and braze welding equipment RN5260/L/504/6420 |
Level 2 | 11 | 61 |
Preparing and using manual metal arc welding equipment RN5260/K/504/6408 |
Level 2 | 15 | 68 |
Preparing and using manual oxy/fuel gas welding equipment RN5260/Y/504/6419 |
Level 2 | 14 | 64 |
Preparing and using manual TIG or plasma-arc welding equipment RN5260/M/504/6409 |
Level 2 | 15 | 68 |
Preparing and using milling machines RN5260/K/504/6375 |
Level 2 | 15 | 68 |
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment RN5260/H/504/6410 |
Level 2 | 15 | 68 |
Producing aircraft detail assemblies RN5260/L/504/6370 |
Level 2 | 14 | 64 |
Producing and preparing molten materials for casting RN5260/K/504/6439 |
Level 2 | 14 | 64 |
Producing and preparing sand moulds and cores for casting RN5260/H/504/6438 |
Level 2 | 14 | 64 |
Producing CAD models/drawings using a CAD system RN5260/R/504/6452 |
Level 2 | 11 | 61 |
Producing cast components by manual means RN5260/D/504/6440 |
Level 2 | 13 | 65 |
Producing components by rapid prototyping techniques RN5260/D/504/6437 |
Level 2 | 11 | 61 |
Producing components using hand fitting techniques RN5260/J/504/6349 |
Level 2 | 14 | 64 |
Producing composite assemblies RN5260/Y/504/6436 |
Level 2 | 14 | 64 |
Producing composite mouldings using pre-preg techniques RN5260/L/504/6434 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Film Infusion Techniques RN5260/J/504/3404 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Flow Infusion Techniques RN5260/R/504/6435 |
Level 2 | 14 | 64 |
Producing composite mouldings using wet lay-up techniques RN5260/F/504/6432 |
Level 2 | 14 | 64 |
Producing electrical or electronic engineering drawings using a CAD system RN5260/R/504/6421 |
Level 2 | 11 | 61 |
Producing engineering project plans RN5260/Y/504/6453 |
Level 2 | 8 | 37 |
Producing mechanical assemblies RN5260/F/504/6351 |
Level 2 | 15 | 68 |
Producing mechanical engineering drawings using a CAD system RN5260/F/504/6348 |
Level 2 | 11 | 61 |
Producing platework components and assemblies RN5260/L/504/6403 |
Level 2 | 14 | 64 |
Producing sheet metal components and assemblies RN5260/J/504/6402 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport engines pre-competition RN5260/L/504/6451 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport vehicles pre-competition RN5260/J/504/6447 |
Level 2 | 14 | 64 |
Using and interpreting engineering data and documentation RN5260/Y/601/5102 |
Level 2 | 5 | 25 |
Using computer software packages to assist with engineering activities RN5260/D/504/6454 |
Level 2 | 8 | 37 |
Using wood for pattern, modelmaking and other engineering applications RN5260/T/504/6430 |
Level 2 | 15 | 68 |
Wiring and testing electrical equipment and circuits RN5260/Y/504/6422 |
Level 2 | 14 | 64 |
Wiring and testing programmable controller based systems RN5260/F/504/6429 |
Level 2 | 15 | 68 |
Analysing and Interpreting the Results of Radiographic Tests RN5260/K/600/5688 |
Level 3 | 70 | 168 |
Carrying Out Condition Monitoring of Engineering Plant and Equipment RN5260/R/600/5796 |
Level 3 | 39 | 81 |
Carrying Out Fault Diagnosis on Engineering Plant and Equipment RN5260/D/600/5798 |
Level 3 | 50 | 60 |
Carrying Out Health and Safety Risk Assessments on Engineering Activities RN5260/K/600/5805 |
Level 3 | 40 | 106 |
Carrying Out Project Management of Engineering Activities RN5260/F/505/1792 |
Level 3 | 40 | 106 |
Carrying Out Radiographic Testing Activities RN5260/Y/600/5685 |
Level 3 | 82 | 189 |
Carrying Out Visual Inspection of Welded Fabrications RN5260/K/600/5559 |
Level 3 | 142 | 287 |
Checking and Calibrating Electrical and Electronic Test Equipment RN5260/L/600/5618 |
Level 3 | 139 | 287 |
Checking and Calibrating Mechanical Inspection Equipment RN5260/K/600/5612 |
Level 3 | 139 | 287 |
Checking and Calibrating Process Control Instrumentation RN5260/H/600/5625 |
Level 3 | 139 | 287 |
Determining Engineering Requirements for the Supply of Products or Services RN5260/F/600/5793 |
Level 3 | 40 | 106 |
Determining Engineering Software Requirements RN5260/D/601/2864 |
Level 3 | 40 | 71 |
Determining Technical Requirements for Non-Destructive Testing RN5260/A/600/5632 |
Level 3 | 65 | 168 |
Developing and Maintaining Effective Customer Relationships RN5260/D/600/5803 |
Level 3 | 20 | 35 |
Handing Over and Exchanging Responsibility for Control of Engineering Activities RN5260/H/600/5804 |
Level 3 | 20 | 35 |
Implementing Engineering Activities RN5260/J/600/5763 |
Level 3 | 40 | 106 |
Implementing Quality Control Systems and Procedures in an Engineering Environment RN5260/H/600/5785 |
Level 3 | 40 | 106 |
Inspecting and Testing Electrical Products RN5260/J/600/5570 |
Level 3 | 142 | 287 |
Inspecting and Testing Electronic Products RN5260/J/600/5603 |
Level 3 | 142 | 287 |
Inspecting Components using Co-ordinate Measuring Machines _CMM_ RN5260/F/600/5535 |
Level 3 | 140 | 287 |
Inspecting Engineering Products by Magnetic Particle Testing RN5260/K/600/5660 |
Level 3 | 82 | 189 |
Inspecting Engineering Products by Penetrant Flaw Detection Techniques RN5260/L/600/5652 |
Level 3 | 52 | 119 |
Inspecting Engineering Products using Ultrasonic Testing Techniques RN5260/H/600/5673 |
Level 3 | 82 | 189 |
Inspecting Fabricated Components and Structures RN5260/F/600/5549 |
Level 3 | 142 | 287 |
Inspecting Mechanical Products RN5260/Y/600/5511 |
Level 3 | 142 | 287 |
Loading and Proving Computer Control Programs RN5260/A/600/5694 |
Level 3 | 24 | 91 |
Monitoring Engineering Activities RN5260/D/600/5767 |
Level 3 | 40 | 106 |
Obtaining and Controlling Materials for Engineering Activities RN5260/R/600/5779 |
Level 3 | 40 | 106 |
Obtaining Resources for Engineering Activities RN5260/A/600/5775 |
Level 3 | 40 | 106 |
Performing Computer System Security Assessments for Engineering Software RN5260/F/601/2906 |
Level 3 | 40 | 71 |
Performing Engineering Software Acquisition RN5260/D/601/2895 |
Level 3 | 40 | 71 |
Performing Engineering Software Analysis Techniques RN5260/J/601/2891 |
Level 3 | 50 | 99 |
Performing Engineering Software Configuration Management RN5260/Y/601/2894 |
Level 3 | 50 | 99 |
Performing Engineering Software Safety Assessments RN5260/M/601/2898 |
Level 3 | 40 | 71 |
Performing Low Level Programming for Engineering Software RN5260/A/601/2905 |
Level 3 | 50 | 99 |
Planning Engineering Activities RN5260/T/600/5760 |
Level 3 | 40 | 106 |
Preparing Ultrasonic Flaw Detection Equipment for Testing Activities RN5260/L/600/5666 |
Level 3 | 36 | 91 |
Preparing Work Areas for Radiographic Testing Activities RN5260/T/600/5676 |
Level 3 | 36 | 91 |
Producing Engineering Software Design RN5260/T/601/2871 |
Level 3 | 50 | 99 |
Producing Contractual Arrangements to Supply or Procure Goods or Services for Engineering Activities RN5260/J/505/1793 |
Level 3 | 40 | 106 |
Producing Electrical Engineering Drawings using Computer Aided Techniques RN5260/H/600/5463 |
Level 3 | 150 | 294 |
Producing Electronic Engineering Drawings using Computer Aided Techniques RN5260/F/600/5471 |
Level 3 | 150 | 294 |
Producing Engineering Drawings/Models using 3D Computer Aided Techniques RN5260/H/600/5429 |
Level 3 | 150 | 294 |
Producing Engineering Software Implementation RN5260/F/601/2887 |
Level 3 | 40 | 71 |
Producing Engineering Systems/Services Drawings using Computer Aided Techniques RN5260/M/600/5496 |
Level 3 | 150 | 294 |
Producing Fabrication/Structural Engineering Drawings using Computer Aided Techniques RN5260/M/600/5482 |
Level 3 | 150 | 294 |
Producing Fluid Power Engineering Drawings using Computer Aided Techniques RN5260/Y/600/5489 |
Level 3 | 150 | 294 |
Producing Mechanical Engineering Drawings using Computer Aided Techniques RN5260/H/600/5415 |
Level 3 | 150 | 294 |
Producing Off-line Programs for NC/CNC Boring Machines RN5260/L/600/5747 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Electro-Discharge Machines RN5260/T/600/5743 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Fabrication Machines RN5260/A/600/5727 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Gear Cutting Machines RN5260/H/600/5740 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Grinding Machines RN5260/H/600/5737 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Laser Profiling Machines RN5260/Y/600/5721 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Machining Centres RN5260/L/600/5750 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Milling Machines RN5260/Y/600/5735 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Turning Machines RN5260/A/600/5730 |
Level 3 | 84 | 231 |
Producing Off-line Programs for Programmable Logic Controller Equipment RN5260/K/600/5710 |
Level 3 | 84 | 231 |
Producing Operating Programs for Co-ordinate Measuring Machines _CMM_ RN5260/H/600/5706 |
Level 3 | 84 | 231 |
Producing Operating Programs for Industrial Robots RN5260/Y/600/5718 |
Level 3 | 84 | 231 |
Producing Technical Information for Engineering Activities RN5260/R/505/1795 |
Level 3 | 40 | 106 |
Providing Operational Support for Computer Control Programs RN5260/M/600/5692 |
Level 3 | 54 | 106 |
Providing Technical Advice and Guidance on Engineering Activities RN5260/R/600/5801 |
Level 3 | 40 | 106 |
Providing Technical Sales and Marketing Support for Engineering Activities RN5260/Y/505/1796 |
Level 3 | 40 | 106 |
Resolving Engineering or Manufacturing Support Problems RN5260/T/505/1790 |
Level 3 | 40 | 96 |
Scheduling Engineering Activities RN5260/A/505/1791 |
Level 3 | 40 | 106 |
Specifying Non-Destructive Testing Instructions for Inspection Activities RN5260/T/600/5645 |
Level 3 | 70 | 168 |
Supporting logistics operations in an engineering manufacturing environment RN5260/L/505/1794 |
Level 3 | 40 | 106 |
Testing Engineering Software RN5260/F/601/2890 |
Level 3 | 50 | 99 |
Using and Maintaining Business Procedures and Protocols in an Engineering Environment RN5260/D/505/1797 |
Level 3 | 40 | 106 |
Working efficiently and effectively in engineering RN5260/K/601/5055 |
Level 3 | 5 | 25 |