EAL Level 3 NVQ Extended Diploma in Engineering Toolmaking
600/1667/X
- Level: Level 3
- Type: Occupational Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: Excellence, Achievement & Learning Limited (Recognised)
- Total credits: 132
- Guided learning hours: 439
- Total qualification time: 1320
- Assessment methods: Portfolio of Evidence
Units (115)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Assembling and testing electronic circuits RN5260/K/504/6425 |
Level 2 | 14 | 64 |
Assembling and testing fluid power systems RN5260/J/504/6397 |
Level 2 | 14 | 64 |
Assembling pattern, model and engineering woodwork components RN5260/A/504/6431 |
Level 2 | 14 | 64 |
Assembling Structural Sub Assemblies to Produce a Public Service Vehicle RN5260/R/503/4057 |
Level 2 | 14 | 64 |
Assembling, wiring and testing electrical panels/components mounted in enclosures RN5260/H/504/6424 |
Level 2 | 14 | 64 |
Carrying out aircraft detail fitting activities RN5260/R/504/6354 |
Level 2 | 14 | 64 |
Carrying out hand forging of engineering materials RN5260/F/504/6446 |
Level 2 | 9 | 41 |
Carrying out heat treatment of engineering materials RN5260/A/504/6445 |
Level 2 | 9 | 41 |
Carrying out maintenance activities on motorsport vehicle electrical equipment RN5260/J/504/6450 |
Level 2 | 15 | 68 |
Complying with statutory regulations and organisational safety requirements RN5260/A/601/5013 |
Level 2 | 5 | 35 |
Conducting business improvement activities RN5260/H/504/6455 |
Level 2 | 8 | 41 |
Cutting and shaping materials using thermal cutting equipment RN5260/R/504/6404 |
Level 2 | 14 | 64 |
Diagnosing and rectifying faults on motorsport vehicle systems during competition RN5260/R/504/6449 |
Level 2 | 15 | 68 |
Fettling, finishing and checking cast components RN5260/H/504/6441 |
Level 2 | 11 | 61 |
Finishing surfaces by applying coatings or coverings RN5260/M/504/6443 |
Level 2 | 9 | 41 |
Finishing surfaces by applying treatments RN5260/T/504/6444 |
Level 2 | 9 | 41 |
Fitting Sub Assemblies and Components to Public Service Vehicles RN5260/Y/503/4058 |
Level 2 | 14 | 64 |
Forming and assembling electrical cable enclosure and support systems RN5260/D/504/6423 |
Level 2 | 13 | 65 |
Forming and assembling pipework systems RN5260/L/504/6353 |
Level 2 | 14 | 64 |
General electrical and electronic engineering applications RN5260/T/504/6458 |
Level 2 | 12 | 55 |
General fabrication and welding applications RN5260/M/504/6457 |
Level 2 | 12 | 55 |
General machining, fitting and assembly applications RN5260/K/504/6456 |
Level 2 | 12 | 55 |
General maintenance engineering applications RN5260/A/504/6459 |
Level 2 | 12 | 55 |
Inspecting a motorsport vehicle during a competition RN5260/L/504/6448 |
Level 2 | 14 | 64 |
Installing aircraft mechanical fasteners RN5260/L/504/6367 |
Level 2 | 11 | 61 |
Maintaining and testing process instrumentation and control devices RN5260/A/504/6428 |
Level 2 | 15 | 68 |
Maintaining electrical equipment/systems RN5260/M/504/6426 |
Level 2 | 15 | 68 |
Maintaining electronic equipment/systems RN5260/T/504/6427 |
Level 2 | 15 | 68 |
Maintaining fluid power equipment RN5260/F/504/6401 |
Level 2 | 14 | 64 |
Maintaining mechanical devices and equipment RN5260/T/504/6394 |
Level 2 | 14 | 64 |
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation RN5260/R/503/7198 |
Level 2 | 14 | 64 |
Preparing and proving CNC fabrication machine tool programs RN5260/Y/504/6405 |
Level 2 | 14 | 64 |
Preparing and proving CNC machine tool programs RN5260/F/504/6379 |
Level 2 | 14 | 64 |
Preparing and using CNC fabrication machinery RN5260/D/504/6406 |
Level 2 | 14 | 64 |
Preparing and using CNC machining centres RN5260/D/504/6387 |
Level 2 | 14 | 64 |
Preparing and using CNC milling machines RN5260/L/504/6384 |
Level 2 | 14 | 64 |
Preparing and using CNC turning machines RN5260/F/504/6382 |
Level 2 | 14 | 64 |
Preparing and using grinding machines RN5260/T/504/6377 |
Level 2 | 15 | 68 |
Preparing and using industrial robots RN5260/D/504/6390 |
Level 2 | 14 | 64 |
Preparing and using lathes for turning operations RN5260/Y/504/6372 |
Level 2 | 15 | 68 |
Preparing and using manual flame brazing and braze welding equipment RN5260/L/504/6420 |
Level 2 | 11 | 61 |
Preparing and using manual metal arc welding equipment RN5260/K/504/6408 |
Level 2 | 15 | 68 |
Preparing and using manual oxy/fuel gas welding equipment RN5260/Y/504/6419 |
Level 2 | 14 | 64 |
Preparing and using manual TIG or plasma-arc welding equipment RN5260/M/504/6409 |
Level 2 | 15 | 68 |
Preparing and using milling machines RN5260/K/504/6375 |
Level 2 | 15 | 68 |
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment RN5260/H/504/6410 |
Level 2 | 15 | 68 |
Producing aircraft detail assemblies RN5260/L/504/6370 |
Level 2 | 14 | 64 |
Producing and preparing molten materials for casting RN5260/K/504/6439 |
Level 2 | 14 | 64 |
Producing and preparing sand moulds and cores for casting RN5260/H/504/6438 |
Level 2 | 14 | 64 |
Producing CAD models/drawings using a CAD system RN5260/R/504/6452 |
Level 2 | 11 | 61 |
Producing cast components by manual means RN5260/D/504/6440 |
Level 2 | 13 | 65 |
Producing components by rapid prototyping techniques RN5260/D/504/6437 |
Level 2 | 11 | 61 |
Producing components using hand fitting techniques RN5260/J/504/6349 |
Level 2 | 14 | 64 |
Producing composite assemblies RN5260/Y/504/6436 |
Level 2 | 14 | 64 |
Producing composite mouldings using pre-preg techniques RN5260/L/504/6434 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Film Infusion Techniques RN5260/J/504/3404 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Flow Infusion Techniques RN5260/R/504/6435 |
Level 2 | 14 | 64 |
Producing composite mouldings using wet lay-up techniques RN5260/F/504/6432 |
Level 2 | 14 | 64 |
Producing electrical or electronic engineering drawings using a CAD system RN5260/R/504/6421 |
Level 2 | 11 | 61 |
Producing engineering project plans RN5260/Y/504/6453 |
Level 2 | 8 | 37 |
Producing mechanical assemblies RN5260/F/504/6351 |
Level 2 | 15 | 68 |
Producing mechanical engineering drawings using a CAD system RN5260/F/504/6348 |
Level 2 | 11 | 61 |
Producing platework components and assemblies RN5260/L/504/6403 |
Level 2 | 14 | 64 |
Producing sheet metal components and assemblies RN5260/J/504/6402 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport engines pre-competition RN5260/L/504/6451 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport vehicles pre-competition RN5260/J/504/6447 |
Level 2 | 14 | 64 |
Using and interpreting engineering data and documentation RN5260/Y/601/5102 |
Level 2 | 5 | 25 |
Using computer software packages to assist with engineering activities RN5260/D/504/6454 |
Level 2 | 8 | 37 |
Using wood for pattern, modelmaking and other engineering applications RN5260/T/504/6430 |
Level 2 | 15 | 68 |
Wiring and testing electrical equipment and circuits RN5260/Y/504/6422 |
Level 2 | 14 | 64 |
Wiring and testing programmable controller based systems RN5260/F/504/6429 |
Level 2 | 15 | 68 |
Assembling blow mould tools RN5260/R/602/2565 |
Level 3 | 70 | 210 |
Assembling dies RN5260/D/602/2570 |
Level 3 | 70 | 210 |
Assembling injection mould tools RN5260/L/602/2564 |
Level 3 | 70 | 210 |
Assembling jig and fixture structures using a manual welding process RN5260/F/602/2805 |
Level 3 | 54 | 216 |
Assembling jigs and fixtures using mechanical methods RN5260/M/602/2802 |
Level 3 | 70 | 210 |
Assembling press tools RN5260/F/602/2562 |
Level 3 | 70 | 210 |
Assembling vacuum forming tools RN5260/K/602/2569 |
Level 3 | 70 | 210 |
Carrying out CNC machine tool programming RN5260/H/602/3008 |
Level 3 | 84 | 231 |
Carrying out condition monitoring of mould, press tool or die equipment RN5260/K/602/2698 |
Level 3 | 39 | 77 |
Carrying out fault diagnosis on mould, press tool or die equipment RN5260/R/602/2694 |
Level 3 | 49 | 56 |
Carrying out planned maintenance on mould, press tool or die equipment RN5260/M/602/2699 |
Level 3 | 38 | 70 |
Carrying out planned maintenance on power presses RN5260/D/602/2777 |
Level 3 | 70 | 119 |
Carrying out repairs or modifications to jigs or fixtures RN5260/L/602/2807 |
Level 3 | 70 | 210 |
Checking that toolroom assemblies comply with specification RN5260/J/602/2644 |
Level 3 | 30 | 91 |
Fabricating structural components for jigs and fixtures RN5260/R/602/2789 |
Level 3 | 54 | 216 |
Handing over and confirming the completion of mould, press tool or die equipment RN5260/L/602/2645 |
Level 3 | 38 | 98 |
Handing over and confirming the completion of mould, press tool or die equipment maintenance activities RN5260/D/602/2696 |
Level 3 | 38 | 98 |
Loading and proving CNC machine tool programs RN5260/Y/602/3006 |
Level 3 | 24 | 91 |
Machining components for jigs and fixtures RN5260/L/602/2788 |
Level 3 | 70 | 210 |
Machining toolroom components using a range of machines RN5260/H/602/2831 |
Level 3 | 139 | 294 |
Machining toolroom components using centre lathes RN5260/A/602/2835 |
Level 3 | 77 | 161 |
Machining toolroom components using electro-discharge machines RN5260/Y/602/2955 |
Level 3 | 77 | 161 |
Machining toolroom components using grinding machines RN5260/H/602/2957 |
Level 3 | 77 | 161 |
Machining toolroom components using milling machines RN5260/F/602/2951 |
Level 3 | 77 | 161 |
Maintaining mould, press tool or die equipment RN5260/Y/602/2695 |
Level 3 | 70 | 119 |
Preparing and setting power presses RN5260/K/602/2653 |
Level 3 | 91 | 210 |
Producing jig and fixture components using hand fitting techniques RN5260/J/602/2787 |
Level 3 | 70 | 210 |
Producing mould, press tool or die components by manual machining RN5260/R/602/2582 |
Level 3 | 70 | 210 |
Producing toolroom components using CNC electro-discharge machines RN5260/F/602/2691 |
Level 3 | 66 | 140 |
Producing toolroom components using CNC grinding machines RN5260/A/602/2673 |
Level 3 | 66 | 140 |
Producing toolroom components using CNC laser profiling machines RN5260/F/602/2688 |
Level 3 | 66 | 140 |
Producing toolroom components using CNC machining centres RN5260/L/602/2693 |
Level 3 | 66 | 140 |
Producing toolroom components using CNC milling machines RN5260/T/602/2672 |
Level 3 | 66 | 140 |
Producing toolroom components using CNC turning machines RN5260/J/602/2658 |
Level 3 | 66 | 140 |
Producing/finishing mould, press tool or die components using hand fitting techniques RN5260/H/602/2571 |
Level 3 | 70 | 210 |
Repairing or modifying mould, press tool or die components RN5260/L/602/2581 |
Level 3 | 70 | 210 |
Setting a range of machines to produce toolroom components RN5260/Y/602/2809 |
Level 3 | 164 | 378 |
Setting centre lathes to produce toolroom components RN5260/T/602/2834 |
Level 3 | 91 | 210 |
Setting electro-discharge machines to produce toolroom components RN5260/L/602/2953 |
Level 3 | 91 | 210 |
Setting grinding machines to produce toolroom components RN5260/D/602/2956 |
Level 3 | 91 | 210 |
Setting milling machines to produce toolroom components RN5260/J/602/2837 |
Level 3 | 91 | 210 |
Trying out and proving dies RN5260/M/602/2654 |
Level 3 | 70 | 210 |
Trying out and proving injection moulds RN5260/T/602/2655 |
Level 3 | 70 | 210 |
Working efficiently and effectively in engineering RN5260/K/601/5055 |
Level 3 | 5 | 25 |