EAL Level 3 NVQ Diploma in Mechanical Manufacturing Engineering
500/9852/4
- Level: Level 3
- Type: Occupational Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: Excellence, Achievement & Learning Limited (Recognised)
- Total credits: 79
- Guided learning hours: 316
- Total qualification time: 790
- Assessment methods: Portfolio of Evidence
Units (154)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Complying with statutory regulations and organisational safety requirements RN5260/A/601/5013 |
Level 2 | 5 | 35 |
Using and interpreting engineering data and documentation RN5260/Y/601/5102 |
Level 2 | 5 | 25 |
Aligning and Setting Up Holographic Equipment RN5260/J/600/5827 |
Level 3 | 77 | 161 |
Applying Finishes to Composite Mouldings RN5260/D/600/5588 |
Level 3 | 46 | 150 |
Assembling Mechanical Products RN5260/J/600/5472 |
Level 3 | 70 | 210 |
Assembling Non-Metallic Pipework RN5260/K/600/5562 |
Level 3 | 30 | 91 |
Assembling Screwed Pipework RN5260/L/600/5554 |
Level 3 | 30 | 91 |
Assembling Small Bore Non-Ferrous Pipework RN5260/D/600/5557 |
Level 3 | 30 | 91 |
Bending Strip Spring Components using Press Brakes RN5260/Y/600/5704 |
Level 3 | 30 | 91 |
Bonding Composite Mouldings RN5260/F/600/5583 |
Level 3 | 30 | 91 |
Building Optical Systems RN5260/M/600/5823 |
Level 3 | 78 | 175 |
Carrying Out CNC Machine Tool Programming RN5260/M/600/5529 |
Level 3 | 84 | 231 |
Carrying Out Heat Treatment of Springs RN5260/D/600/5719 |
Level 3 | 30 | 91 |
Carrying Out Laser/Optical Metrology RN5260/D/600/5820 |
Level 3 | 46 | 150 |
Carrying Out Non-Destructive Flaw Detection on Components During Overhauling Activities RN5260/A/600/5615 |
Level 3 | 24 | 89 |
Carrying Out Quality Control of Spring Making Activities RN5260/M/600/5725 |
Level 3 | 46 | 150 |
Carrying Out Shot Peening of Springs RN5260/H/600/5723 |
Level 3 | 30 | 91 |
Carrying Out Tests on Overhauled Industrial Power Turbines RN5260/K/600/5500 |
Level 3 | 70 | 210 |
Carrying Out Tests on Overhauled Piston Engines _Fixed Dynamometer_ RN5260/D/600/5512 |
Level 3 | 70 | 210 |
Checking Mechanical Components for Serviceability During Overhauling Activities RN5260/H/600/5611 |
Level 3 | 24 | 89 |
Checking that Completed Assemblies Comply with Specification RN5260/L/600/5537 |
Level 3 | 30 | 91 |
Checking that Overhauled Mechanical Assemblies Comply with Specification RN5260/A/600/5629 |
Level 3 | 30 | 91 |
Dismantling Mechanical Equipment in Preparation for Overhaul RN5260/R/600/5605 |
Level 3 | 49 | 161 |
Drilling and Finishing Holes in Strip Spring Components RN5260/M/600/5711 |
Level 3 | 16 | 57 |
Fitting Electrical and Electronic Components to Mechanical Assemblies RN5260/R/600/5488 |
Level 3 | 60 | 161 |
Fitting Fluid Power Components to Mechanical Assemblies RN5260/H/600/5480 |
Level 3 | 60 | 161 |
Fitting Pipework Systems to Mechanical Assemblies RN5260/F/600/5485 |
Level 3 | 60 | 161 |
Following Clean Room and Clean Work Area Protocols RN5260/R/600/5829 |
Level 3 | 16 | 57 |
Forming Strip Spring Components using Power Presses RN5260/M/600/5708 |
Level 3 | 30 | 91 |
Forming Strip Spring Components using Power Rolling Machines RN5260/L/600/5702 |
Level 3 | 30 | 91 |
Grinding Spring Ends by Hand RN5260/D/600/5560 |
Level 3 | 16 | 57 |
Handing Over Machine Tools to Production Operators RN5260/A/600/5436 |
Level 3 | 38 | 98 |
Identifying Defects in Composite Mouldings RN5260/A/600/5596 |
Level 3 | 30 | 91 |
Inspecting Optical Components using Co-ordinate Measuring Machines _CMM_ RN5260/K/600/5819 |
Level 3 | 46 | 150 |
Inspecting Optical Components using Mechanical Instruments RN5260/D/600/5817 |
Level 3 | 30 | 91 |
Loading and Proving CNC Machine Tool Programs RN5260/L/600/5523 |
Level 3 | 24 | 91 |
Machining Components using Broaching Machines RN5260/A/600/5503 |
Level 3 | 33 | 119 |
Machining Components using Centre Lathes RN5260/A/600/5386 |
Level 3 | 77 | 161 |
Machining Components using CNC Aspheric Glass and Diamond Turning Machines RN5260/F/600/5762 |
Level 3 | 46 | 150 |
Machining Components using CNC Electro-Discharge Machines RN5260/F/600/5924 |
Level 3 | 63 | 126 |
Machining Components using CNC Gear Cutting Machines RN5260/D/600/5980 |
Level 3 | 63 | 126 |
Machining Components using CNC Grinding Machines RN5260/R/600/5622 |
Level 3 | 63 | 126 |
Machining Components using CNC Horizontal Boring Machines RN5260/K/600/5965 |
Level 3 | 63 | 126 |
Machining Components using CNC Laser Profiling Machines RN5260/H/600/5916 |
Level 3 | 63 | 126 |
Machining Components using CNC Machining Centres RN5260/D/600/5994 |
Level 3 | 63 | 126 |
Machining Components using CNC Milling Machines RN5260/K/600/5576 |
Level 3 | 63 | 126 |
Machining Components using CNC Optical Grinding and Polishing Machines RN5260/D/600/5770 |
Level 3 | 46 | 150 |
Machining Components using CNC Punching Machines RN5260/T/600/5662 |
Level 3 | 63 | 126 |
Machining Components using CNC Turning Machines RN5260/F/600/5566 |
Level 3 | 63 | 126 |
Machining Components using CNC Vertical Boring Machines RN5260/Y/600/5928 |
Level 3 | 63 | 126 |
Machining Components using Electro-Discharge Machines RN5260/L/600/5439 |
Level 3 | 77 | 161 |
Machining Components using Gear Cutting Machines RN5260/K/600/5397 |
Level 3 | 77 | 161 |
Machining Components using Gear Grinding Machines RN5260/D/600/5400 |
Level 3 | 77 | 161 |
Machining Components using Grinding Machines RN5260/Y/600/5458 |
Level 3 | 77 | 161 |
Machining Components using Honing and Lapping Machines RN5260/L/600/5487 |
Level 3 | 33 | 119 |
Machining Components using Horizontal Boring Machines RN5260/L/600/5411 |
Level 3 | 77 | 161 |
Machining Components using Milling Machines RN5260/L/600/5392 |
Level 3 | 77 | 161 |
Machining Components using Shaping, Planing or Slotting Machines RN5260/Y/600/5394 |
Level 3 | 69 | 126 |
Machining Components using Turret Lathes RN5260/J/600/5388 |
Level 3 | 77 | 161 |
Machining Components using Vertical Boring Machines RN5260/Y/600/5430 |
Level 3 | 77 | 161 |
Machining Infra-Red/Special Material Lenses RN5260/J/600/5746 |
Level 3 | 77 | 161 |
Machining Optical Cylinders and Domes RN5260/J/600/5813 |
Level 3 | 77 | 161 |
Machining Optical Glass Lenses RN5260/R/600/5751 |
Level 3 | 77 | 161 |
Machining Optical Plastic Components RN5260/L/600/5814 |
Level 3 | 77 | 161 |
Machining Optical Prism and Flat Components RN5260/H/600/5754 |
Level 3 | 77 | 161 |
Making Compression Springs using Hand Forming Methods RN5260/F/600/5521 |
Level 3 | 46 | 150 |
Making Extension Springs using Hand Forming Methods RN5260/Y/600/5539 |
Level 3 | 46 | 150 |
Making Spring Wire Forms using Hand Forming Methods RN5260/A/600/5548 |
Level 3 | 46 | 150 |
Making Strip Spring Components using Shearing Machines RN5260/Y/600/5699 |
Level 3 | 30 | 91 |
Making Torsion Springs using Hand Forming Methods RN5260/K/600/5531 |
Level 3 | 46 | 150 |
Manufacturing One-Off Tooling for Spring Making Activities RN5260/M/600/5739 |
Level 3 | 77 | 161 |
Operating CNC Spring Making Machines RN5260/T/600/5693 |
Level 3 | 30 | 91 |
Overhauling Components of Hydraulic Equipment RN5260/J/600/5486 |
Level 3 | 77 | 161 |
Overhauling Components of Pneumatic, Vacuum or Compressed Air Equipment RN5260/D/600/5493 |
Level 3 | 77 | 161 |
Overhauling Gearbox Assemblies RN5260/Y/600/5654 |
Level 3 | 86 | 210 |
Overhauling Industrial Clutch and Brake Assemblies RN5260/K/600/5657 |
Level 3 | 77 | 161 |
Overhauling Industrial Power Turbine Combustion Assemblies RN5260/Y/600/5640 |
Level 3 | 86 | 210 |
Overhauling Industrial Power Turbine Compressor Assemblies RN5260/R/600/5636 |
Level 3 | 86 | 210 |
Overhauling Industrial Power Turbines by Module Replacement RN5260/T/600/5631 |
Level 3 | 86 | 210 |
Overhauling Piston Engines RN5260/F/600/5650 |
Level 3 | 86 | 210 |
Overhauling Pump Assemblies RN5260/F/600/5468 |
Level 3 | 77 | 161 |
Overhauling Turbine Assemblies from Industrial Power Turbines RN5260/A/600/5646 |
Level 3 | 86 | 210 |
Overhauling Valve Assemblies RN5260/K/600/5478 |
Level 3 | 77 | 161 |
Performing Laser Optical System Alignment RN5260/F/600/5826 |
Level 3 | 46 | 150 |
Pipe Bending and Forming by Hand Methods RN5260/Y/600/5542 |
Level 3 | 46 | 150 |
Pipe Bending and Forming using Bending Machines RN5260/T/600/5547 |
Level 3 | 46 | 150 |
Polishing and Smoothing of Lens or Mirror Surfaces RN5260/R/600/5815 |
Level 3 | 77 | 161 |
Preparing and Testing Pipework Systems RN5260/J/600/5567 |
Level 3 | 46 | 150 |
Producing Components by Manual Machining RN5260/H/600/5477 |
Level 3 | 70 | 210 |
Producing Components using Hand Fitting Techniques RN5260/A/600/5470 |
Level 3 | 70 | 210 |
Producing Components using Metal Spinning Machines RN5260/K/600/5514 |
Level 3 | 77 | 161 |
Producing Composite Assemblies RN5260/M/600/5580 |
Level 3 | 86 | 210 |
Producing Composite Mouldings using Pre-Preg Laminating Techniques RN5260/D/600/5574 |
Level 3 | 86 | 210 |
Producing Composite Mouldings using Wet Lay-up Techniques RN5260/T/600/5578 |
Level 3 | 86 | 210 |
Producing Piston Engine Assemblies RN5260/J/600/5522 |
Level 3 | 70 | 210 |
Producing Power Turbine Combustion Assemblies RN5260/Y/600/5492 |
Level 3 | 70 | 210 |
Producing Power Turbine Compressor Assemblies RN5260/A/600/5498 |
Level 3 | 70 | 210 |
Producing Power Turbine Gearbox Assemblies RN5260/R/600/5510 |
Level 3 | 70 | 210 |
Producing Power Turbine Major Assemblies RN5260/M/600/5515 |
Level 3 | 70 | 210 |
Producing Replacement Components for Overhauling Activities RN5260/D/600/5624 |
Level 3 | 49 | 161 |
Producing Socket and Flange Fillet Welded Joints in Pipe using a Manual Welding Process RN5260/L/600/5571 |
Level 3 | 86 | 210 |
Producing Turbine Assemblies RN5260/F/600/5504 |
Level 3 | 70 | 210 |
Programming CNC Spring Making Machines RN5260/H/600/5687 |
Level 3 | 84 | 231 |
Repairing and Modifying Mechanical Assemblies RN5260/H/600/5527 |
Level 3 | 70 | 210 |
Repairing Composite Mouldings RN5260/Y/600/5587 |
Level 3 | 77 | 161 |
Restoring Mechanical Components to Usable Condition by Repair RN5260/R/600/5619 |
Level 3 | 49 | 161 |
Setting and Operating CNC Laser Profiling Machines for Strip Spring Making RN5260/A/600/5744 |
Level 3 | 77 | 161 |
Setting and Using a Fly Press for Spring Making Activities RN5260/F/600/5695 |
Level 3 | 30 | 91 |
Setting Automatic Cold Wire Compression Spring Making Machines for Production RN5260/H/600/5575 |
Level 3 | 46 | 150 |
Setting Automatic Cold Wire Extension Spring Making Machines for Production RN5260/J/600/5648 |
Level 3 | 46 | 150 |
Setting Automatic Cold Wire Forming Machines to Produce Spring Wire Forms RN5260/M/600/5661 |
Level 3 | 46 | 150 |
Setting Automatic Cold Wire Torsion Spring Making Machines for Production RN5260/L/600/5635 |
Level 3 | 46 | 150 |
Setting Automatic Hot Wire Compression Spring Making Machines for Production RN5260/D/600/5672 |
Level 3 | 46 | 150 |
Setting Automatic Spring End Grinding Machines for Production RN5260/L/600/5683 |
Level 3 | 16 | 60 |
Setting Automatic Spring Making Machines for the Production of Clock, Power, Scroll and Volute Springs RN5260/R/600/5653 |
Level 3 | 46 | 150 |
Setting Broaching Machines for Production RN5260/L/600/5490 |
Level 3 | 78 | 175 |
Setting Capstan and Turret Lathes for Production RN5260/Y/600/5444 |
Level 3 | 91 | 210 |
Setting Centre Lathes for Production RN5260/T/600/5385 |
Level 3 | 91 | 210 |
Setting CNC Aspheric Glass and Diamond Turning Machines RN5260/A/600/5758 |
Level 3 | 78 | 175 |
Setting CNC Electro-Discharge Machines for Production RN5260/M/600/5921 |
Level 3 | 70 | 140 |
Setting CNC Gear Cutting Machines for Production RN5260/L/600/5974 |
Level 3 | 70 | 140 |
Setting CNC Grinding Machines for Production RN5260/J/600/5584 |
Level 3 | 70 | 140 |
Setting CNC Horizontal Boring Machines for Production RN5260/K/600/5951 |
Level 3 | 70 | 140 |
Setting CNC Laser Profiling Machines for Production RN5260/R/600/5670 |
Level 3 | 70 | 140 |
Setting CNC Machining Centres for Production RN5260/L/600/5991 |
Level 3 | 70 | 140 |
Setting CNC Milling Machines for Production RN5260/R/600/5572 |
Level 3 | 70 | 140 |
Setting CNC Optical Grinding and Polishing Machines for Production RN5260/Y/600/5766 |
Level 3 | 78 | 175 |
Setting CNC Punching Machines for Production RN5260/K/600/5643 |
Level 3 | 70 | 140 |
Setting CNC Spring Making Machines for Production RN5260/H/600/5690 |
Level 3 | 46 | 150 |
Setting CNC Turning Machines for Production RN5260/H/600/5561 |
Level 3 | 70 | 140 |
Setting CNC Vertical Boring Machines for Production RN5260/R/600/5927 |
Level 3 | 70 | 140 |
Setting Electro-Discharge Machines for Production RN5260/H/600/5432 |
Level 3 | 91 | 210 |
Setting Gear Cutting Machines for Production RN5260/D/600/5395 |
Level 3 | 91 | 210 |
Setting Gear Grinding Machines for Production RN5260/M/600/5398 |
Level 3 | 91 | 210 |
Setting Grinding Machines for Production RN5260/M/600/5448 |
Level 3 | 91 | 210 |
Setting Honing and Lapping Machines for Production RN5260/L/600/5473 |
Level 3 | 78 | 175 |
Setting Horizontal Boring Machines for Production RN5260/K/600/5402 |
Level 3 | 91 | 210 |
Setting Metal Spinning Machines for Production RN5260/D/600/5509 |
Level 3 | 78 | 175 |
Setting Milling Machines for Production RN5260/J/600/5391 |
Level 3 | 91 | 210 |
Setting Multi-Spindle Automatic Turning Machines for Production RN5260/T/600/5452 |
Level 3 | 77 | 161 |
Setting Power Presses for Production RN5260/A/600/5467 |
Level 3 | 91 | 210 |
Setting Shaping, Planing or Slotting Machines for Production RN5260/R/600/5393 |
Level 3 | 78 | 175 |
Setting Single and Multi-Spindle Drilling Machines for Production RN5260/J/600/5455 |
Level 3 | 77 | 161 |
Setting Single-Spindle Automatic Turning Machines for Production RN5260/K/600/5450 |
Level 3 | 91 | 210 |
Setting Special-Purpose Machines for Production RN5260/D/600/5462 |
Level 3 | 91 | 210 |
Setting Tool and Cutter Grinding Machines for Production RN5260/Y/600/5461 |
Level 3 | 77 | 161 |
Setting Turret Lathes for Production RN5260/F/600/5387 |
Level 3 | 91 | 210 |
Setting Vertical Boring Machines for Production RN5260/F/600/5423 |
Level 3 | 91 | 210 |
Slinging, Lifting and Moving Equipment, Components or Materials for Overhauling Activities RN5260/T/600/5600 |
Level 3 | 24 | 89 |
Terminating Fibre-Optic Cables RN5260/K/600/5822 |
Level 3 | 30 | 91 |
Trimming Composite Mouldings using Hand Tools RN5260/K/600/5593 |
Level 3 | 46 | 150 |
Using Heat to Assist with the Bending and Forming of Spring Components RN5260/L/600/5716 |
Level 3 | 16 | 57 |
Vacuum Coating Optical Materials RN5260/Y/600/5816 |
Level 3 | 30 | 91 |
Working efficiently and effectively in engineering RN5260/K/601/5055 |
Level 3 | 5 | 25 |