City & Guilds Level 3 NVQ Extended Diploma in Engineering Technical Support
601/0082/5
- Level: Level 3
- Type: Occupational Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: City & Guilds Limited (Recognised)
- Total credits: 150
- Guided learning hours: 434
- Total qualification time: 1500
- Assessment methods: Portfolio of Evidence
Units (136)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Assembling and testing electronic circuits RN6142/K/504/6425 |
Level 2 | 14 | 64 |
Assembling and testing fluid power systems RN6142/J/504/6397 |
Level 2 | 14 | 64 |
Assembling pattern, model and engineering woodwork components RN6142/A/504/6431 |
Level 2 | 14 | 64 |
Assembling, wiring and testing electrical panels/components mounted in enclosures RN6142/H/504/6424 |
Level 2 | 14 | 64 |
Carrying out aircraft detail fitting activities RN6142/R/504/6354 |
Level 2 | 14 | 64 |
Carrying out hand forging of engineering materials RN6142/F/504/6446 |
Level 2 | 9 | 41 |
Carrying out heat treatment of engineering materials RN6142/A/504/6445 |
Level 2 | 9 | 41 |
Carrying out maintenance activities on motorsport vehicle electrical equipment RN6142/J/504/6450 |
Level 2 | 15 | 68 |
Complying with statutory regulations and organisational safety requirements RN6142/A/601/5013 |
Level 2 | 5 | 35 |
Conducting business improvement activities RN6142/H/504/6455 |
Level 2 | 8 | 41 |
Cutting and shaping materials using thermal cutting equipment RN6142/R/504/6404 |
Level 2 | 14 | 64 |
Diagnosing and rectifying faults on motorsport vehicle systems during competition RN6142/R/504/6449 |
Level 2 | 15 | 68 |
Fettling, finishing and checking cast components RN6142/H/504/6441 |
Level 2 | 11 | 61 |
Finishing surfaces by applying coatings or coverings RN6142/M/504/6443 |
Level 2 | 9 | 41 |
Finishing surfaces by applying treatments RN6142/T/504/6444 |
Level 2 | 9 | 41 |
Forming and assembling electrical cable enclosure and support systems RN6142/D/504/6423 |
Level 2 | 13 | 65 |
Forming and assembling pipework systems RN6142/L/504/6353 |
Level 2 | 14 | 64 |
General electrical and electronic engineering applications RN6142/T/504/6458 |
Level 2 | 12 | 55 |
General fabrication and welding applications RN6142/M/504/6457 |
Level 2 | 12 | 55 |
General machining, fitting and assembly applications RN6142/K/504/6456 |
Level 2 | 12 | 55 |
General maintenance engineering applications RN6142/A/504/6459 |
Level 2 | 12 | 55 |
Inspecting a motorsport vehicle during a competition RN6142/L/504/6448 |
Level 2 | 14 | 64 |
Installing aircraft mechanical fasteners RN6142/L/504/6367 |
Level 2 | 11 | 61 |
Maintaining and testing process instrumentation and control devices RN6142/A/504/6428 |
Level 2 | 15 | 68 |
Maintaining electrical equipment/systems RN6142/M/504/6426 |
Level 2 | 15 | 68 |
Maintaining electronic equipment/systems RN6142/T/504/6427 |
Level 2 | 15 | 68 |
Maintaining fluid power equipment RN6142/F/504/6401 |
Level 2 | 14 | 64 |
Maintaining mechanical devices and equipment RN6142/T/504/6394 |
Level 2 | 14 | 64 |
Preparing and proving CNC fabrication machine tool programs RN6142/Y/504/6405 |
Level 2 | 14 | 64 |
Preparing and proving CNC machine tool programs RN6142/F/504/6379 |
Level 2 | 14 | 64 |
Preparing and using CNC fabrication machinery RN6142/D/504/6406 |
Level 2 | 14 | 64 |
Preparing and using CNC machining centres RN6142/D/504/6387 |
Level 2 | 14 | 64 |
Preparing and using CNC milling machines RN6142/L/504/6384 |
Level 2 | 14 | 64 |
Preparing and using CNC turning machines RN6142/F/504/6382 |
Level 2 | 14 | 64 |
Preparing and using grinding machines RN6142/T/504/6377 |
Level 2 | 15 | 68 |
Preparing and using industrial robots RN6142/D/504/6390 |
Level 2 | 14 | 64 |
Preparing and using lathes for turning operations RN6142/Y/504/6372 |
Level 2 | 15 | 68 |
Preparing and using manual flame brazing and braze welding equipment RN6142/L/504/6420 |
Level 2 | 11 | 61 |
Preparing and using manual metal arc welding equipment RN6142/K/504/6408 |
Level 2 | 15 | 68 |
Preparing and using manual oxy/fuel gas welding equipment RN6142/Y/504/6419 |
Level 2 | 14 | 64 |
Preparing and using manual TIG or plasma-arc welding equipment RN6142/M/504/6409 |
Level 2 | 15 | 68 |
Preparing and using milling machines RN6142/K/504/6375 |
Level 2 | 15 | 68 |
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment RN6142/H/504/6410 |
Level 2 | 15 | 68 |
Producing aircraft detail assemblies RN6142/L/504/6370 |
Level 2 | 14 | 64 |
Producing and preparing molten materials for casting RN6142/K/504/6439 |
Level 2 | 14 | 64 |
Producing and preparing sand moulds and cores for casting RN6142/H/504/6438 |
Level 2 | 14 | 64 |
Producing CAD models/drawings using a CAD system RN6142/R/504/6452 |
Level 2 | 11 | 61 |
Producing cast components by manual means RN6142/D/504/6440 |
Level 2 | 13 | 65 |
Producing components by rapid prototyping techniques RN6142/D/504/6437 |
Level 2 | 11 | 61 |
Producing components using hand fitting techniques RN6142/J/504/6349 |
Level 2 | 14 | 64 |
Producing composite assemblies RN6142/Y/504/6436 |
Level 2 | 14 | 64 |
Producing composite mouldings using pre-preg techniques RN6142/L/504/6434 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Flow Infusion Techniques RN6142/R/504/6435 |
Level 2 | 14 | 64 |
Producing composite mouldings using wet lay-up techniques RN6142/F/504/6432 |
Level 2 | 14 | 64 |
Producing electrical or electronic engineering drawings using a CAD system RN6142/R/504/6421 |
Level 2 | 11 | 61 |
Producing engineering project plans RN6142/Y/504/6453 |
Level 2 | 8 | 37 |
Producing mechanical assemblies RN6142/F/504/6351 |
Level 2 | 15 | 68 |
Producing mechanical engineering drawings using a CAD system RN6142/F/504/6348 |
Level 2 | 11 | 61 |
Producing platework components and assemblies RN6142/L/504/6403 |
Level 2 | 14 | 64 |
Producing sheet metal components and assemblies RN6142/J/504/6402 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport engines pre-competition RN6142/L/504/6451 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport vehicles pre-competition RN6142/J/504/6447 |
Level 2 | 14 | 64 |
Using and interpreting engineering data and documentation RN6142/Y/601/5102 |
Level 2 | 5 | 25 |
Using computer software packages to assist with engineering activities RN6142/D/504/6454 |
Level 2 | 8 | 37 |
Using wood for pattern, modelmaking and other engineering applications RN6142/T/504/6430 |
Level 2 | 15 | 68 |
Wiring and testing programmable controller based systems RN6142/F/504/6429 |
Level 2 | 15 | 68 |
Analysing and Interpreting the Results of Radiographic Tests RN6142/K/600/5688 |
Level 3 | 70 | 168 |
Carrying Out Condition Monitoring of Engineering Plant and Equipment RN6142/R/600/5796 |
Level 3 | 39 | 81 |
Carrying Out Fault Diagnosis on Engineering Plant and Equipment RN6142/D/600/5798 |
Level 3 | 50 | 60 |
Carrying Out Health and Safety Risk Assessments on Engineering Activities RN6142/K/600/5805 |
Level 3 | 40 | 106 |
Carrying Out Project Management of Engineering Activities RN6142/Y/600/5802 |
Level 3 | 40 | 106 |
Carrying Out Radiographic Testing Activities RN6142/Y/600/5685 |
Level 3 | 82 | 189 |
Carrying Out Visual Inspection of Welded Fabrications RN6142/K/600/5559 |
Level 3 | 142 | 287 |
Checking and Calibrating Electrical and Electronic Test Equipment RN6142/L/600/5618 |
Level 3 | 139 | 287 |
Checking and Calibrating Mechanical Inspection Equipment RN6142/K/600/5612 |
Level 3 | 139 | 287 |
Checking and Calibrating Process Control Instrumentation RN6142/H/600/5625 |
Level 3 | 139 | 287 |
Determining Engineering Requirements for the Supply of Products or Services RN6142/F/600/5793 |
Level 3 | 40 | 106 |
Determining Engineering Software Requirements RN6142/D/601/2864 |
Level 3 | 40 | 71 |
Determining Technical Requirements for Non-Destructive Testing RN6142/A/600/5632 |
Level 3 | 65 | 168 |
Developing and Maintaining Effective Customer Relationships RN6142/D/600/5803 |
Level 3 | 20 | 35 |
Handing Over and Exchanging Responsibility for Control of Engineering Activities RN6142/H/600/5804 |
Level 3 | 20 | 35 |
Implementing Engineering Activities RN6142/J/600/5763 |
Level 3 | 40 | 106 |
Implementing Quality Control Systems and Procedures in an Engineering Environment RN6142/H/600/5785 |
Level 3 | 40 | 106 |
Inspecting and Testing Electrical Products RN6142/J/600/5570 |
Level 3 | 142 | 287 |
Inspecting and Testing Electronic Products RN6142/J/600/5603 |
Level 3 | 142 | 287 |
Inspecting Components using Co-ordinate Measuring Machines _CMM_ RN6142/F/600/5535 |
Level 3 | 140 | 287 |
Inspecting Engineering Products by Magnetic Particle Testing RN6142/K/600/5660 |
Level 3 | 82 | 189 |
Inspecting Engineering Products by Penetrant Flaw Detection Techniques RN6142/L/600/5652 |
Level 3 | 52 | 119 |
Inspecting Engineering Products using Ultrasonic Testing Techniques RN6142/H/600/5673 |
Level 3 | 82 | 189 |
Inspecting Fabricated Components and Structures RN6142/F/600/5549 |
Level 3 | 142 | 287 |
Inspecting Mechanical Products RN6142/Y/600/5511 |
Level 3 | 142 | 287 |
Loading and Proving Computer Control Programs RN6142/A/600/5694 |
Level 3 | 24 | 91 |
Measuring Engineering Software Quality RN6142/L/601/2892 |
Level 3 | 40 | 71 |
Monitoring Engineering Activities RN6142/D/600/5767 |
Level 3 | 40 | 106 |
Obtaining and Controlling Materials for Engineering Activities RN6142/R/600/5779 |
Level 3 | 40 | 106 |
Obtaining Resources for Engineering Activities RN6142/A/600/5775 |
Level 3 | 40 | 106 |
Performing Computer System Security Assessments for Engineering Software RN6142/F/601/2906 |
Level 3 | 40 | 71 |
Performing Engineering Software Acquisition RN6142/D/601/2895 |
Level 3 | 40 | 71 |
Performing Engineering Software Analysis Techniques RN6142/J/601/2891 |
Level 3 | 50 | 99 |
Performing Engineering Software Configuration Management RN6142/Y/601/2894 |
Level 3 | 50 | 99 |
Performing Engineering Software Safety Assessments RN6142/M/601/2898 |
Level 3 | 40 | 71 |
Performing Low Level Programming for Engineering Software RN6142/A/601/2905 |
Level 3 | 50 | 99 |
Planning Engineering Activities RN6142/T/600/5760 |
Level 3 | 40 | 106 |
Preparing Ultrasonic Flaw Detection Equipment for Testing Activities RN6142/L/600/5666 |
Level 3 | 36 | 91 |
Preparing Work Areas for Radiographic Testing Activities RN6142/T/600/5676 |
Level 3 | 36 | 91 |
Producing Engineering Software Design RN6142/T/601/2871 |
Level 3 | 50 | 99 |
Producing Contractual Arrangements to Supply or Procure Goods or Services for Engineering Activities RN6142/M/600/5806 |
Level 3 | 40 | 106 |
Producing Electrical Engineering Drawings using Computer Aided Techniques RN6142/H/600/5463 |
Level 3 | 150 | 294 |
Producing Electronic Engineering Drawings using Computer Aided Techniques RN6142/F/600/5471 |
Level 3 | 150 | 294 |
Producing Engineering Drawings/Models using 3D Computer Aided Techniques RN6142/H/600/5429 |
Level 3 | 150 | 294 |
Producing Engineering Software Implementation RN6142/F/601/2887 |
Level 3 | 40 | 71 |
Producing Engineering Systems/Services Drawings using Computer Aided Techniques RN6142/M/600/5496 |
Level 3 | 150 | 294 |
Producing Fabrication/Structural Engineering Drawings using Computer Aided Techniques RN6142/M/600/5482 |
Level 3 | 150 | 294 |
Producing Fluid Power Engineering Drawings using Computer Aided Techniques RN6142/Y/600/5489 |
Level 3 | 150 | 294 |
Producing Mechanical Engineering Drawings using Computer Aided Techniques RN6142/H/600/5415 |
Level 3 | 150 | 294 |
Producing Off-line Programs for NC/CNC Boring Machines RN6142/L/600/5747 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Electro-Discharge Machines RN6142/T/600/5743 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Fabrication Machines RN6142/A/600/5727 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Gear Cutting Machines RN6142/H/600/5740 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Grinding Machines RN6142/H/600/5737 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Laser Profiling Machines RN6142/Y/600/5721 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Machining Centres RN6142/L/600/5750 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Milling Machines RN6142/Y/600/5735 |
Level 3 | 84 | 231 |
Producing Off-line Programs for NC/CNC Turning Machines RN6142/A/600/5730 |
Level 3 | 84 | 231 |
Producing Off-line Programs for Programmable Logic Controller Equipment RN6142/K/600/5710 |
Level 3 | 84 | 231 |
Producing Operating Programs for Co-ordinate Measuring Machines _CMM_ RN6142/H/600/5706 |
Level 3 | 84 | 231 |
Producing Operating Programs for Industrial Robots RN6142/Y/600/5718 |
Level 3 | 84 | 231 |
Producing Technical Information for Engineering Activities RN6142/K/600/5772 |
Level 3 | 40 | 106 |
Providing Operational Support for Computer Control Programs RN6142/M/600/5692 |
Level 3 | 54 | 106 |
Providing Technical Advice and Guidance on Engineering Activities RN6142/R/600/5801 |
Level 3 | 40 | 106 |
Providing Technical Sales and Marketing Support for Engineering Activities RN6142/R/600/5782 |
Level 3 | 40 | 106 |
Resolving Engineering Problems RN6142/K/600/5755 |
Level 3 | 40 | 96 |
Scheduling Engineering Activities RN6142/A/600/5789 |
Level 3 | 40 | 106 |
Specifying Non-Destructive Testing Instructions for Inspection Activities RN6142/T/600/5645 |
Level 3 | 70 | 168 |
Testing Engineering Software RN6142/F/601/2890 |
Level 3 | 50 | 99 |
Working efficiently and effectively in engineering RN6142/K/601/5055 |
Level 3 | 5 | 25 |