EAL Level 2 NVQ Diploma in Marine Engineering
600/1031/9
- Level: Level 2
- Type: Occupational Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: Excellence, Achievement & Learning Limited (Recognised)
- Total credits:
- Guided learning hours: 239
- Total qualification time: 597
- Assessment methods: Portfolio of Evidence
Units (127)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Applying Fairing, Filling and Specialist Protective Coatings to Marine Components RN5260/J/601/2602 |
Level 2 | 38 | 84 |
Applying Holding Primer by Spray Methods RN5260/F/650/2970 |
Level 2 | 35 | |
Applying Surface Finishes to Yacht and Boat Wooden Assemblies RN5260/D/601/2623 |
Level 2 | 25 | 70 |
Applying Surface Treatments to Marine Wooden Assemblies RN5260/K/601/2205 |
Level 2 | 25 | 63 |
Applying Yacht and Boat Paints/Coating Materials Manually RN5260/T/601/2630 |
Level 2 | 25 | 35 |
Applying Yacht and Boat Paints/Coating Materials using Spray Methods RN5260/F/601/2632 |
Level 2 | 25 | 35 |
Assembling Marine Composite Components RN5260/L/601/2293 |
Level 2 | 42 | 151 |
Assembling Marine Sheet Metal Components RN5260/L/601/2360 |
Level 2 | 35 | 84 |
Assisting in Modifying and Adding Electrical Circuits in Yachts and Boats RN5260/R/601/2733 |
Level 2 | 22 | 70 |
Assisting in Mooring and Berthing Operations RN5260/A/601/2497 |
Level 2 | 30 | 77 |
Assisting in the Assembly of Marine Steelwork Components RN5260/T/601/2045 |
Level 2 | 32 | 63 |
Assisting in the Assembly of Wooden Furniture/Outfitting Units for Yachts and Boats RN5260/L/601/2620 |
Level 2 | 22 | 56 |
Assisting in the Assembly of Wooden Structural Components to Produce Yachts and Boats RN5260/Y/601/2622 |
Level 2 | 40 | 98 |
Assisting in the Disconnection and Removal of Yacht and Boat Electrical/Electronic Equipment RN5260/M/601/2724 |
Level 2 | 20 | 42 |
Assisting in the Disconnection and Removal of Yacht and Boat Mechanical and Ancillary Equipment RN5260/A/601/2726 |
Level 2 | 30 | 56 |
Assisting in the Installation of Ancillary Equipment in Yachts and Boats RN5260/F/601/2615 |
Level 2 | 30 | 84 |
Assisting in the Installation of Domestic Equipment in Yachts and Boats RN5260/L/601/2617 |
Level 2 | 28 | 70 |
Assisting in the Installation of Electrical/Electronic Equipment in Yachts and Boats RN5260/H/601/2610 |
Level 2 | 32 | 91 |
Assisting in the Installation of Engines/Propulsion Systems in Yachts and Boats RN5260/T/601/2613 |
Level 2 | 32 | 91 |
Assisting in the Installation of Marine Electrical Equipment RN5260/T/601/1803 |
Level 2 | 32 | 91 |
Assisting in the Installation of Marine Mechanical Equipment RN5260/J/601/2051 |
Level 2 | 32 | 91 |
Assisting in the Installation of Marine Pipework and Components RN5260/H/601/1974 |
Level 2 | 28 | 63 |
Assisting in the Installation of Marine Sheet Metal Components/Assemblies RN5260/H/601/2364 |
Level 2 | 30 | 77 |
Assisting in the installation of Wooden Furniture/Outfitting Units in Yachts and Boats RN5260/R/601/2621 |
Level 2 | 28 | 77 |
Assisting in the Preparation of Docks and Slips for Vessel Operations RN5260/T/601/2496 |
Level 2 | 30 | 77 |
Assisting in the Testing of Marine Pipework Systems RN5260/T/601/1977 |
Level 2 | 22 | 56 |
Bending and Forming Marine Sheet Metal using Hand and Machine Tools RN5260/D/601/2329 |
Level 2 | 28 | 77 |
Carrying Out Bonding Operations on Marine Composite Components RN5260/J/601/2308 |
Level 2 | 23 | 95 |
Carrying Out Maintenance on Marine Ancillary Plant and Equipment RN5260/L/601/2083 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Auxiliary Power Units for Electrical Power Generation RN5260/R/601/2067 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Fire Main Systems and Equipment RN5260/L/601/2195 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Fuel Systems and Equipment RN5260/F/601/2064 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Lifting Equipment RN5260/J/601/2082 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Liquid Ballast Systems RN5260/T/601/2191 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Mechanical Control Systems and Equipment RN5260/T/601/2076 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Pantry and Galley Equipment RN5260/D/601/2198 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Pneumatic Systems and Equipment RN5260/L/601/2066 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Steam Plant and Equipment RN5260/R/601/2084 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Marine Steering Gear, Control Systems and Equipment RN5260/A/601/2080 |
Level 2 | 42 | 98 |
Carrying Out Maintenance on Rigging and Lifting Equipment RN5260/D/601/2492 |
Level 2 | 30 | 77 |
Carrying Out Manual Splicing of Wire and Fibre Ropes RN5260/J/601/2499 |
Level 2 | 25 | 70 |
Carrying Out Manual Torch Brazing and Soldering of Marine Pipework RN5260/T/601/1980 |
Level 2 | 28 | 63 |
Carrying Out Modifications and Rewiring of Marine Electrical Circuits RN5260/J/601/1935 |
Level 2 | 22 | 70 |
Carrying Out Patch Preparation of Material Surfaces using Hand and Mechanical Tools RN5260/T/601/2501 |
Level 2 | 10 | 42 |
Carrying Out Preparations for Rigging Activities RN5260/J/601/2471 |
Level 2 | 18 | 49 |
Carrying Out Repairs to Marine Composite Mouldings RN5260/L/601/2312 |
Level 2 | 42 | 151 |
Carrying out repairs to Yacht and Boat Composite Components RN5260/T/601/2627 |
Level 2 | 40 | 98 |
Carrying out Repairs to Yacht and Boat Wooden Components and Assemblies RN5260/M/601/2626 |
Level 2 | 40 | 77 |
Carrying out Routine Servicing of Yacht and Boat Electrical/Electronic Equipment RN5260/F/601/2730 |
Level 2 | 28 | 63 |
Carrying out Routine Servicing of Yacht and Boat Mechanical and Ancillary Equipment RN5260/J/601/2728 |
Level 2 | 28 | 63 |
Carrying Out Scheduled Maintenance on Marine Electrical Equipment RN5260/A/601/1947 |
Level 2 | 19 | 56 |
Carrying Out Scheduled Maintenance on Marine Mechanical Equipment RN5260/Y/601/2054 |
Level 2 | 28 | 63 |
Carrying Out Tests on Marine Electrical Equipment and Circuits RN5260/Y/601/1938 |
Level 2 | 22 | 63 |
Carrying Out the Application of Deck Screeds and Other Deck Coverings RN5260/H/601/2588 |
Level 2 | 25 | 35 |
Carrying out the Application of Fairing/Filling Compounds to Yachts and Boats RN5260/K/601/2723 |
Level 2 | 20 | 63 |
Carrying Out the Application of Marine Coatings using Spray Methods RN5260/F/601/2582 |
Level 2 | 25 | 37 |
Carrying Out the Application of Signature Reduction Coverings RN5260/H/601/2591 |
Level 2 | 25 | 35 |
Carrying Out the Installation of Cable Runs and Circuits in Marine Structures RN5260/K/601/1796 |
Level 2 | 32 | 91 |
Carrying out the Installation of Cable Runs and Circuits in Yachts and Boats RN5260/D/601/2606 |
Level 2 | 28 | 70 |
Carrying Out the Installation of Rigging and Lifting Equipment RN5260/M/601/2500 |
Level 2 | 35 | 84 |
Carrying Out the Manual Application of Marine Coatings RN5260/H/601/2574 |
Level 2 | 25 | 35 |
Carrying Out the Preparation of Material Surfaces by Abrasive Blasting RN5260/A/601/2502 |
Level 2 | 10 | 42 |
Carrying Out Trimming Operations on Marine Composite Mouldings RN5260/M/601/2299 |
Level 2 | 32 | 130 |
Checking Marine Composite Components/Mouldings for Defects RN5260/K/601/2317 |
Level 2 | 23 | 95 |
Checking Rigging and Lifting Equipment RN5260/K/601/2494 |
Level 2 | 15 | 42 |
Complying with statutory regulations and organisational safety requirements RN5260/A/601/5013 |
Level 2 | 5 | 35 |
Cutting and Shaping Marine Sheet Metal using Hand and Machine Tools RN5260/A/601/2323 |
Level 2 | 28 | 70 |
Cutting and Shaping Marine Soft Furnishings RN5260/M/601/2206 |
Level 2 | 30 | 91 |
Cutting and Shaping Marine Steelwork using Gas Cutting Machines RN5260/R/601/1985 |
Level 2 | 28 | 56 |
Cutting and Shaping Materials using CNC Laser Profiling Machines RN5260/J/601/2356 |
Level 2 | 37 | 130 |
Cutting and Shaping using NC/CNC Plasma or Gas Cutting Machines RN5260/R/601/2358 |
Level 2 | 37 | 130 |
Cutting and Shaping Wooden Components for Yachts and Boats using Hand Tools RN5260/R/601/2618 |
Level 2 | 50 | 119 |
Cutting and Shaping Wooden Components for Yachts and Boats using Machines RN5260/Y/601/2619 |
Level 2 | 28 | 77 |
Cutting Marine Steelwork using Handheld Thermal Cutting Equipment RN5260/J/601/1983 |
Level 2 | 22 | 56 |
Cutting Marine Steelwork using Saws and Abrasive Discs RN5260/Y/601/1986 |
Level 2 | 13 | 42 |
Cutting Marine Steelwork using Shearing Machines RN5260/H/601/1988 |
Level 2 | 21 | 56 |
Disconnecting and Removing Marine Electrical Equipment RN5260/R/601/1940 |
Level 2 | 20 | 49 |
Disconnecting and Removing Marine Mechanical Equipment RN5260/T/601/2062 |
Level 2 | 30 | 63 |
Drilling and Finishing Holes in Marine Steelwork RN5260/T/601/2000 |
Level 2 | 10 | 49 |
Fitting Marine Composite Components to the Vessel, Craft or Structure RN5260/H/601/2302 |
Level 2 | 30 | 126 |
Fitting Marine Interior Panels and Soft Furnishings RN5260/M/601/2285 |
Level 2 | 25 | 65 |
Fitting Marine Seating and Furniture RN5260/A/601/2287 |
Level 2 | 25 | 65 |
Fitting Seating, Interior Panels, Soft Furnishing and Trim in Yachts and Boats RN5260/K/601/2625 |
Level 2 | 28 | 77 |
Forming Marine Components by Acrylic Moulding RN5260/F/601/2291 |
Level 2 | 32 | 130 |
Joining Ferrous Marine Pipework by Mechanical Means RN5260/M/601/1962 |
Level 2 | 22 | 56 |
Joining Marine Materials and Components using Adhesives RN5260/J/601/2373 |
Level 2 | 14 | 42 |
Joining Marine Materials/Structures using Manual MIG/MAG and other Continuous Wire Processes RN5260/K/601/2382 |
Level 2 | 54 | 196 |
Joining Marine Materials/Structures using Manual TIG and Plasma-Arc Welding Processes RN5260/A/601/2385 |
Level 2 | 54 | 196 |
Joining Marine Materials/Structures using the Manual Gas Welding Process RN5260/L/601/2388 |
Level 2 | 50 | 175 |
Joining Marine Materials/Structures using the Manual Metal Arc _MMA_ Welding Process RN5260/D/601/2380 |
Level 2 | 54 | 196 |
Joining Non-Ferrous Marine Pipework RN5260/L/601/1970 |
Level 2 | 22 | 56 |
Joining Non-Metallic Marine Pipework RN5260/Y/601/1972 |
Level 2 | 19 | 49 |
Locating Faults in Marine Electrical Equipment and Circuits RN5260/T/601/1932 |
Level 2 | 28 | 63 |
Locating Faults in Marine Mechanical Equipment RN5260/R/601/2053 |
Level 2 | 26 | 49 |
Marking Off for the Manufacture of Marine Steelwork Components RN5260/A/601/1981 |
Level 2 | 18 | 42 |
Marking Out for Manufacture and Assembly of Marine Wooden Components RN5260/L/601/2200 |
Level 2 | 18 | 42 |
Marking Out Marine Sheet Metalwork RN5260/K/601/2320 |
Level 2 | 18 | 42 |
Moving Materials and Components in a Marine Environment RN5260/J/601/2468 |
Level 2 | 13 | 49 |
Operating CNC Fabrication Machines RN5260/A/601/2001 |
Level 2 | 35 | 77 |
Positioning and Securing Marine Access Structures RN5260/R/601/2473 |
Level 2 | 28 | 56 |
Preparing Holding Primer for Application RN5260/Y/650/2969 |
Level 2 | 42 | |
Preparing Marine Coatings for Application RN5260/M/601/2559 |
Level 2 | 10 | 42 |
Preparing Surfaces by Ultra High Pressure _UHP_ Water Jetting RN5260/H/601/2509 |
Level 2 | 10 | 42 |
Preparing Yacht and Boat Material Surfaces by Abrasive Blasting RN5260/D/601/2721 |
Level 2 | 10 | 42 |
Preparing Yacht and Boat Paints/Coating Materials for Application RN5260/F/601/2629 |
Level 2 | 10 | 42 |
Preparing Yacht and Boat Surfaces for Painting/Finishing RN5260/A/601/2628 |
Level 2 | 10 | 42 |
Producing Assemblies of Marine Wooden Components RN5260/D/601/2203 |
Level 2 | 25 | 70 |
Producing Fillet Welded Joints using a Manual Welding Process RN5260/H/601/2378 |
Level 2 | 44 | 147 |
Producing Socket and Flange Fillet Welded Joints in Low Pressure Marine Pipework using a Manual Welding Process RN5260/F/601/1979 |
Level 2 | 44 | 169 |
Rectifying Metallic Surfaces using Hand and Power Tools RN5260/H/650/2971 |
Level 2 | 42 | |
Removing Marine Access Structures RN5260/D/601/2489 |
Level 2 | 28 | 56 |
Repairing Marine Mechanical Components RN5260/M/601/2058 |
Level 2 | 23 | 77 |
Setting Up and Preparing Loads for Moving RN5260/A/601/2466 |
Level 2 | 12 | 49 |
Shaping Marine Steelwork using a Power Press RN5260/Y/601/2040 |
Level 2 | 28 | 56 |
Shaping Marine Steelwork using Power Rolling Machines RN5260/M/601/2044 |
Level 2 | 28 | 56 |
Shaping Marine Wooden Components using Hand Tools RN5260/R/601/2201 |
Level 2 | 50 | 119 |
Shaping Marine Wooden Components using Machines RN5260/Y/601/2202 |
Level 2 | 28 | 77 |
Tack Welding Fillet Joints in Marine Steelwork RN5260/J/601/2048 |
Level 2 | 20 | 56 |
Using and interpreting engineering data and documentation RN5260/Y/601/5102 |
Level 2 | 5 | 25 |
Using Bending Machines to Form Marine Pipe RN5260/H/601/1957 |
Level 2 | 28 | 63 |
Using Hand Methods to Bend and Form Marine Pipe RN5260/L/601/1953 |
Level 2 | 28 | 63 |
Using Mechanical Fasteners to Join Marine Sheet Metal Components RN5260/K/601/2365 |
Level 2 | 18 | 42 |
Using Pre-Preg Laminating Techniques to Produce Marine Composite Components RN5260/A/601/2290 |
Level 2 | 42 | 151 |
Using Resistance Spot Welding to Join Marine Sheet Metal Materials RN5260/T/601/2367 |
Level 2 | 7 | 37 |
Using Wet Lay-Up Techniques to Produce Marine Composite Components RN5260/F/601/2288 |
Level 2 | 42 | 151 |
Vacuum Forming Marine Composite Materials RN5260/R/601/2294 |
Level 2 | 32 | 130 |
Working efficiently and effectively in engineering RN5260/Y/601/5052 |
Level 2 | 5 | 25 |