ETCAL Level 4 NVQ Extended Diploma in Engineering Manufacture
601/1863/5
- Level: Level 4
- Type: Vocationally-Related Qualification
- Status: Available to learners
- Offered in England: Yes
- Awarding body: ETC Awards Limited (Recognised)
- Total credits: 107
- Guided learning hours: 476
- Total qualification time: 1070
- Assessment methods: Coursework, E-assessment, Portfolio of Evidence, Practical Demonstration/Assignment, Practical Examination, Task-based Controlled Assessment
Units (182)
| Unit | Level | Credits | GLH |
|---|---|---|---|
Assembling and testing electronic circuits RN5135/K/504/6425 |
Level 2 | 14 | 64 |
Assembling and testing fluid power systems RN5135/J/504/6397 |
Level 2 | 14 | 64 |
Assembling pattern, model and engineering woodwork components RN5135/A/504/6431 |
Level 2 | 14 | 64 |
Assembling Structural Sub Assemblies to Produce a Public Service Vehicle RN5135/R/503/4057 |
Level 2 | 14 | 64 |
Assembling, wiring and testing electrical panels/components mounted in enclosures RN5135/H/504/6424 |
Level 2 | 14 | 64 |
Carrying out aircraft detail fitting activities RN5135/R/504/6354 |
Level 2 | 14 | 64 |
Carrying out hand forging of engineering materials RN5135/F/504/6446 |
Level 2 | 9 | 41 |
Carrying out heat treatment of engineering materials RN5135/A/504/6445 |
Level 2 | 9 | 41 |
Carrying out maintenance activities on motorsport vehicle electrical equipment RN5135/J/504/6450 |
Level 2 | 15 | 68 |
Complying with statutory regulations and organisational safety requirements RN5135/A/601/5013 |
Level 2 | 5 | 35 |
Conducting business improvement activities RN5135/H/504/6455 |
Level 2 | 8 | 41 |
Cutting and shaping materials using thermal cutting equipment RN5135/R/504/6404 |
Level 2 | 14 | 64 |
Diagnosing and rectifying faults on motorsport vehicle systems during competition RN5135/R/504/6449 |
Level 2 | 15 | 68 |
Fettling, finishing and checking cast components RN5135/H/504/6441 |
Level 2 | 11 | 61 |
Finishing surfaces by applying coatings or coverings RN5135/M/504/6443 |
Level 2 | 9 | 41 |
Finishing surfaces by applying treatments RN5135/T/504/6444 |
Level 2 | 9 | 41 |
Fitting Sub Assemblies and Components to Public Service Vehicles RN5135/Y/503/4058 |
Level 2 | 14 | 64 |
Forming and assembling electrical cable enclosure and support systems RN5135/D/504/6423 |
Level 2 | 13 | 65 |
Forming and assembling pipework systems RN5135/L/504/6353 |
Level 2 | 14 | 64 |
General electrical and electronic engineering applications RN5135/T/504/6458 |
Level 2 | 12 | 55 |
General fabrication and welding applications RN5135/M/504/6457 |
Level 2 | 12 | 55 |
General machining, fitting and assembly applications RN5135/K/504/6456 |
Level 2 | 12 | 55 |
General maintenance engineering applications RN5135/A/504/6459 |
Level 2 | 12 | 55 |
Inspecting a motorsport vehicle during a competition RN5135/L/504/6448 |
Level 2 | 14 | 64 |
Installing aircraft mechanical fasteners RN5135/L/504/6367 |
Level 2 | 11 | 61 |
Joining Public Service Vehicle Components by Mechanical Processes RN5135/L/503/4056 |
Level 2 | 11 | 61 |
Maintaining and testing process instrumentation and control devices RN5135/A/504/6428 |
Level 2 | 15 | 68 |
Maintaining electrical equipment/systems RN5135/M/504/6426 |
Level 2 | 15 | 68 |
Maintaining electronic equipment/systems RN5135/T/504/6427 |
Level 2 | 15 | 68 |
Maintaining fluid power equipment RN5135/F/504/6401 |
Level 2 | 14 | 64 |
Maintaining mechanical devices and equipment RN5135/T/504/6394 |
Level 2 | 14 | 64 |
Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation RN5135/R/503/7198 |
Level 2 | 14 | 64 |
Preparing and proving CNC fabrication machine tool programs RN5135/Y/504/6405 |
Level 2 | 14 | 64 |
Preparing and proving CNC machine tool programs RN5135/F/504/6379 |
Level 2 | 14 | 64 |
Preparing and using CNC fabrication machinery RN5135/D/504/6406 |
Level 2 | 14 | 64 |
Preparing and using CNC machining centres RN5135/D/504/6387 |
Level 2 | 14 | 64 |
Preparing and using CNC milling machines RN5135/L/504/6384 |
Level 2 | 14 | 64 |
Preparing and using CNC turning machines RN5135/F/504/6382 |
Level 2 | 14 | 64 |
Preparing and using industrial robots RN5135/D/504/6390 |
Level 2 | 14 | 64 |
Preparing and using lathes for turning operations RN5135/Y/504/6372 |
Level 2 | 15 | 68 |
Preparing and using manual flame brazing and braze welding equipment RN5135/L/504/6420 |
Level 2 | 11 | 61 |
Preparing and using manual metal arc welding equipment RN5135/K/504/6408 |
Level 2 | 15 | 68 |
Preparing and using manual oxy/fuel gas welding equipment RN5135/Y/504/6419 |
Level 2 | 14 | 64 |
Preparing and using manual TIG or plasma-arc welding equipment RN5135/M/504/6409 |
Level 2 | 15 | 68 |
Preparing and using milling machines RN5135/K/504/6375 |
Level 2 | 15 | 68 |
Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment RN5135/H/504/6410 |
Level 2 | 15 | 68 |
Producing aircraft detail assemblies RN5135/L/504/6370 |
Level 2 | 14 | 64 |
Producing and preparing molten materials for casting RN5135/K/504/6439 |
Level 2 | 14 | 64 |
Producing and preparing sand moulds and cores for casting RN5135/H/504/6438 |
Level 2 | 14 | 64 |
Producing CAD models/drawings using a CAD system RN5135/R/504/6452 |
Level 2 | 11 | 61 |
Producing cast components by manual means RN5135/D/504/6440 |
Level 2 | 13 | 65 |
Producing components by rapid prototyping techniques RN5135/D/504/6437 |
Level 2 | 11 | 61 |
Producing components using hand fitting techniques RN5135/J/504/6349 |
Level 2 | 14 | 64 |
Producing composite assemblies RN5135/Y/504/6436 |
Level 2 | 14 | 64 |
Producing composite mouldings using pre-preg techniques RN5135/L/504/6434 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Film Infusion Techniques RN5135/J/504/3404 |
Level 2 | 14 | 64 |
Producing Composite Mouldings using Resin Flow Infusion Techniques RN5135/R/504/6435 |
Level 2 | 14 | 64 |
Producing composite mouldings using wet lay-up techniques RN5135/F/504/6432 |
Level 2 | 14 | 64 |
Producing electrical or electronic engineering drawings using a CAD system RN5135/R/504/6421 |
Level 2 | 11 | 61 |
Producing engineering project plans RN5135/Y/504/6453 |
Level 2 | 8 | 37 |
Producing mechanical assemblies RN5135/F/504/6351 |
Level 2 | 15 | 68 |
Producing mechanical engineering drawings using a CAD system RN5135/F/504/6348 |
Level 2 | 11 | 61 |
Producing platework components and assemblies RN5135/L/504/6403 |
Level 2 | 14 | 64 |
Producing sheet metal components and assemblies RN5135/J/504/6402 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport engines pre-competition RN5135/L/504/6451 |
Level 2 | 14 | 64 |
Stripping and rebuilding motorsport vehicles pre-competition RN5135/J/504/6447 |
Level 2 | 14 | 64 |
Using computer software packages to assist with engineering activities RN5135/D/504/6454 |
Level 2 | 8 | 37 |
Using wood for pattern, modelmaking and other engineering applications RN5135/T/504/6430 |
Level 2 | 15 | 68 |
Wiring and testing electrical equipment and circuits RN5135/Y/504/6422 |
Level 2 | 14 | 64 |
Wiring and testing programmable controller based systems RN5135/F/504/6429 |
Level 2 | 15 | 68 |
Agree a budget RN5135/J/601/2552 |
Level 3 | 4 | 25 |
Address performance problems affecting team members RN5135/F/600/9679 |
Level 4 | 3 | 20 |
Analyse the market in which your organisation operates RN5135/M/600/9791 |
Level 4 | 5 | 25 |
Applying quality function deployment _QFD_ RN5135/J/600/5875 |
Level 4 | 9 | 25 |
Build, support and manage a team RN5135/F/600/9682 |
Level 4 | 4 | 20 |
Carry out Maintenance Activities on Electrical Equipment RN5135/Y/505/0972 |
Level 4 | 16 | 56 |
Carry out Maintenance Activities on Electrical Equipment within an Engineered System RN5135/M/505/0976 |
Level 4 | 16 | 56 |
Carry out Maintenance Activities on Fluid Power Equipment RN5135/D/505/0973 |
Level 4 | 16 | 56 |
Carry out Maintenance Activities on Fluid Power Equipment within an Engineered System RN5135/A/505/0978 |
Level 4 | 16 | 56 |
Carry out Maintenance Activities on Instrumentation and Control Equipment RN5135/H/505/0974 |
Level 4 | 16 | 56 |
Carry out Maintenance Activities on Mechanical Equipment RN5135/R/505/0971 |
Level 4 | 16 | 56 |
Carry out Maintenance Activities on Mechanical Equipment within an Engineered System RN5135/K/505/0975 |
Level 4 | 16 | 56 |
Carry out Maintenance Activities on Process Controller Equipment within an Engineered System RN5135/F/505/0979 |
Level 4 | 16 | 56 |
Carry out the Testing and Calibration of Instrumentation Control Equipment and Circuits RN5135/L/505/0970 |
Level 4 | 16 | 56 |
Carrying out design of experiments _DOE_ RN5135/L/600/5862 |
Level 4 | 9 | 25 |
Commission a new product manufacturing process RN5135/T/505/1059 |
Level 4 | 16 | 56 |
Commission Engineering Products, Processes or Facilities RN5135/M/505/0962 |
Level 4 | 16 | 56 |
Configure Engineering Products, Processes or Facilities RN5135/H/505/0957 |
Level 4 | 16 | 56 |
Contribute to a team feasibility review of a new product design RN5135/Y/505/1006 |
Level 4 | 16 | 56 |
Control the New Product Design Change Process RN5135/H/505/1008 |
Level 4 | 16 | 56 |
Create Engineering Designs RN5135/D/505/0939 |
Level 4 | 16 | 56 |
Determine the Requirements for Engineering Activities RN5135/Y/505/0941 |
Level 4 | 16 | 56 |
Determine Welding and Related Technical Requirements to Achieve Objectives RN5135/D/505/0987 |
Level 4 | 16 | 56 |
Develop a new product manufacturing process design strategy RN5135/F/505/1050 |
Level 4 | 16 | 56 |
Develop a new product manufacturing process flow and floor plan layout RN5135/J/505/1051 |
Level 4 | 16 | 56 |
Develop a Research Methodology for Engineering RN5135/L/505/0953 |
Level 4 | 16 | 56 |
Develop a Strategy for the Engineering Design Process RN5135/D/505/0956 |
Level 4 | 16 | 56 |
Develop and implement a risk assessment plan in own area of responsibilty RN5135/L/600/9703 |
Level 4 | 6 | 20 |
Develop and implement marketing plans RN5135/K/600/9790 |
Level 4 | 6 | 25 |
Develop working relationships with colleagues and stakeholders RN5135/K/600/9661 |
Level 4 | 4 | 20 |
Develop, maintain and review personal networks RN5135/R/600/9587 |
Level 4 | 4 | 25 |
Ensure compliance with legal, regulatory, ethical and social requirements RN5135/H/600/9609 |
Level 4 | 5 | 25 |
Establish an Engineering Design Brief RN5135/Y/505/0938 |
Level 4 | 16 | 56 |
Establish manufacturing process design brief for new product introduction RN5135/L/505/1049 |
Level 4 | 16 | 56 |
Establish new product development and introduction brief RN5135/H/505/1011 |
Level 4 | 16 | 56 |
Evaluate Engineering Designs RN5135/R/505/0940 |
Level 4 | 16 | 56 |
Evaluate Engineering Risk Assessments RN5135/A/505/0947 |
Level 4 | 16 | 56 |
Evaluate the Results of Engineering Research RN5135/Y/505/0955 |
Level 4 | 16 | 56 |
Identify and Define Areas of Engineering Research RN5135/J/505/0952 |
Level 4 | 16 | 56 |
Identify Engineering Design Requirements of Clients RN5135/F/505/0934 |
Level 4 | 16 | 56 |
Implement change in own area of responsibility RN5135/M/600/9659 |
Level 4 | 6 | 25 |
Implement Engineering Processes RN5135/M/505/0945 |
Level 4 | 16 | 56 |
Implement Quality Assurance Methods and Procedures RN5135/J/505/0949 |
Level 4 | 16 | 56 |
Implement Welding Production Methods and Procedures RN5135/K/505/0989 |
Level 4 | 16 | 56 |
Improve the Quality of Engineering Products or Processes RN5135/A/505/0950 |
Level 4 | 16 | 56 |
Inspect Welded Components or Structures for Visual Quality and Dimensional Accuracy RN5135/K/505/0992 |
Level 4 | 16 | 56 |
Investigate Incidents Relating to Engineering Activities RN5135/K/505/0961 |
Level 4 | 16 | 56 |
Know how to follow disciplinary procedures RN5135/H/600/9691 |
Level 4 | 4 | 20 |
Lead Electrical/Electronic Product Manufacturing or Testing Activities RN5135/Y/505/0969 |
Level 4 | 16 | 56 |
Lead Installation or Commissioning Activities RN5135/J/505/0966 |
Level 4 | 16 | 56 |
Lead Maintenance Activities RN5135/A/505/0964 |
Level 4 | 16 | 56 |
Lead Mechanical Manufacturing or Inspection Activities RN5135/F/505/0965 |
Level 4 | 16 | 56 |
Lead Rail Welding Activities RN5135/R/505/0968 |
Level 4 | 16 | 56 |
Lead Welding and Fabrication Activities RN5135/L/505/0967 |
Level 4 | 16 | 56 |
Leading continuous improvement _Kaizen_ activities RN5135/M/600/5420 |
Level 4 | 14 | 32 |
Leading failure modes and effects analysis _FMEA_ activities RN5135/L/600/5733 |
Level 4 | 9 | 25 |
Leading measurement systems analysis _MSA_ activities RN5135/R/600/5748 |
Level 4 | 9 | 25 |
Leading mistake/error proofing _Poka Yoke_ activities RN5135/K/600/5867 |
Level 4 | 9 | 25 |
Leading statistical process control _SPC_ activities RN5135/J/600/5665 |
Level 4 | 8 | 25 |
Leading the application of basic statistical analysis RN5135/T/600/5919 |
Level 4 | 10 | 25 |
Leading the application of Six Sigma methodology to a project RN5135/D/600/5896 |
Level 4 | 14 | 32 |
Leading the application of Six Sigma metrics to a project RN5135/Y/600/5931 |
Level 4 | 9 | 25 |
Leading the carrying out of capability studies RN5135/L/600/5957 |
Level 4 | 14 | 32 |
Leading the carrying out of Six Sigma process mapping RN5135/T/600/5905 |
Level 4 | 14 | 32 |
Leading the creation of flexible production and manpower systems RN5135/K/600/5447 |
Level 4 | 7 | 25 |
Leading the creation of standard operating procedures _SOP_ RN5135/F/600/5888 |
Level 4 | 8 | 25 |
Leading the development of visual management systems RN5135/M/600/5434 |
Level 4 | 9 | 25 |
Leading the production of a characteristic selection matrix RN5135/R/600/5944 |
Level 4 | 9 | 25 |
Leading value management _value engineering and value analysis_ activities RN5135/A/600/5713 |
Level 4 | 11 | 32 |
Leading value stream mapping _VSM_ activities RN5135/M/600/5563 |
Level 4 | 13 | 32 |
Leading workplace organisation activities RN5135/F/600/5406 |
Level 4 | 10 | 25 |
Make decisions in a business environment RN5135/H/601/2560 |
Level 4 | 4 | 24 |
Manage a tendering process RN5135/H/600/9738 |
Level 4 | 4 | 20 |
Manage budgets RN5135/T/601/2580 |
Level 4 | 5 | 29 |
Manage physical resources RN5135/K/600/9711 |
Level 4 | 3 | 25 |
Manage the achievement of customer satisfaction RN5135/A/600/9793 |
Level 4 | 5 | 25 |
Manage the environmental impact of work activities RN5135/M/600/9712 |
Level 4 | 5 | 10 |
Managing grievance procedures RN5135/K/600/9692 |
Level 4 | 3 | 10 |
Monitor and Evaluate Engineering Processes RN5135/T/505/0946 |
Level 4 | 16 | 56 |
Monitor Welding Activities in Production RN5135/H/505/0991 |
Level 4 | 16 | 56 |
Negotiate in a business environment RN5135/K/601/2561 |
Level 4 | 7 | 40 |
Obtain Resources for the Implementation of Engineering Activities RN5135/K/505/0944 |
Level 4 | 16 | 56 |
Plan and control new product design benchmarking activities RN5135/K/505/1009 |
Level 4 | 16 | 56 |
Plan and control new product manufacturing process benchmarking activities RN5135/J/505/1048 |
Level 4 | 16 | 56 |
Plan and Decommission Engineering Equipment, Processes or Facilities RN5135/H/505/0960 |
Level 4 | 16 | 56 |
Plan and manage the installation of the new product manufacturing process RN5135/R/505/1053 |
Level 4 | 16 | 56 |
Plan Welding Production Resources and Activities RN5135/H/505/0988 |
Level 4 | 16 | 56 |
Plan, allocate and monitor work in own area of responsibility RN5135/H/600/9674 |
Level 4 | 5 | 25 |
Prepare for and support quality audits RN5135/Y/600/9798 |
Level 4 | 4 | 20 |
Prepare specifications for contracts RN5135/F/601/2565 |
Level 4 | 5 | 30 |
Produce and evaluate conceptual design options for new products RN5135/D/505/1010 |
Level 4 | 16 | 56 |
Produce Engineering Specifications RN5135/J/505/0935 |
Level 4 | 16 | 56 |
Produce new product designs for manufacture and assembly RN5135/T/505/1045 |
Level 4 | 16 | 56 |
Propose and Specify Engineering Research RN5135/R/505/0954 |
Level 4 | 16 | 56 |
Propose Decommissioning of Engineering Equipment, Processes or Facilities RN5135/M/505/0959 |
Level 4 | 16 | 56 |
Provide leadership and direction for own area of responsibility RN5135/T/600/9601 |
Level 4 | 5 | 30 |
Provide Technical Advice and Guidance on Engineering or Manufacturing Requirements RN5135/F/505/0951 |
Level 4 | 16 | 56 |
Review risk management processes in own area of responsibility RN5135/L/600/9622 |
Level 4 | 3 | 20 |
Schedule Engineering Activities RN5135/H/505/0943 |
Level 4 | 16 | 56 |
Solve engineering or manufacturing problems RN5135/A/505/0933 |
Level 4 | 16 | 56 |
Solve Welding Problems in Production RN5135/D/505/0990 |
Level 4 | 16 | 56 |
Specify Methods and Procedures to Achieve Engineering Requirements RN5135/D/505/0942 |
Level 4 | 16 | 56 |
Specify Risk Reduction Methods and Procedures RN5135/F/505/0948 |
Level 4 | 16 | 56 |
Support individuals to develop and take responsibility for their performance RN5135/D/600/9690 |
Level 4 | 4 | 20 |
Support learning and development within own area of responsibility RN5135/M/600/9676 |
Level 4 | 5 | 25 |
Support the management of redundancies in own area of responsibility RN5135/M/600/9693 |
Level 4 | 3 | 15 |
Transfer Control of Engineering Products, Processes or Facilities RN5135/K/505/0958 |
Level 4 | 16 | 56 |
Undertake Engineering Research RN5135/L/505/0936 |
Level 4 | 16 | 56 |
Undertake Project Management Activities RN5135/T/505/0963 |
Level 4 | 16 | 56 |
Verify new product designs using a computer model RN5135/K/505/1012 |
Level 4 | 16 | 56 |
Verify new product designs using a physical model RN5135/L/505/1018 |
Level 4 | 16 | 56 |
Develop and evaluate operational plans for own area of responsibility RN5135/Y/600/9588 |
Level 5 | 6 | 25 |